Displaying 1 to 25 (of 63 products)
Slide Hammer
Brand: | S&G Tool Aid |
Part #: |
81001 |
UPC: |
638570810011 |
Weight: |
9.58 lbs |
Condition: | New |
Every body technician uses this dolly for bumping, straightening, dinging and finishing various portions of body, door panels and fenders. Good variety of curves and angles, with two beading and flanging lips. Made of drop-forged steel.
Brand: | S&G Tool Aid |
Part #: |
88000 |
UPC: |
0638570880007 |
Weight: |
7.92 lbs |
Condition: | New |
Large drop forged steel model remains popular with body technicians. Has flat and low crown areas and is used in dinging flat surfaces and lower portions of hood. Good for close work.
Brand: | S&G Tool Aid |
Part #: |
88050 |
UPC: |
638570880502 |
Weight: |
2.58 lbs |
Condition: | New |
A useful drop forged steel dolly for work behind brackets, braces and other reinforcements on roof, body, fenders and panels. Easy to hold in difficult areas.
Brand: | S&G Tool Aid |
Part #: |
88100 |
UPC: |
638570881004 |
Weight: |
3.16 lbs |
Condition: | New |
Popular for use in sharp corners and wide radii portions of panels and body. Made of drop forged steel.
Brand: | S&G Tool Aid |
Part #: |
88150 |
UPC: |
638570881509 |
Weight: |
2.52 lbs |
Condition: | New |
Rubber Door Skin Dolly
Brand: | S&G Tool Aid |
Part #: |
88160 |
UPC: |
0638570881608 |
Weight: |
0.96 lbs |
Condition: | New |
The most popular body repair specialty tool. Combines all the contours and weight of a dolly with the reach and maneuverability of a spoon. Use for forming, prying and caulking in those hard to reach places.
Brand: | S&G Tool Aid |
Part #: |
88175 |
UPC: |
0638570881752 |
Weight: |
3.98 lbs |
Condition: | New |
Hammer Handles With Wedge Fits Hammer with Blue Head
Brand: | S&G Tool Aid |
Part #: |
89002 |
UPC: |
638570890020 |
Weight: |
0.37 lbs |
Condition: | New |
For high crown work and finishing, this drop forged hammer is specially designed to reduce the time needed to fold the flange on door skins. Can also be used to reach the inner panels on vehicles.
Brand: | S&G Tool Aid |
Part #: |
89350 |
UPC: |
0697950893501 |
Weight: |
1.04 lbs |
Condition: | New |
Hammer Handles With Wedge Fits Hammers With Black Head
Brand: | S&G Tool Aid |
Part #: |
89357 |
UPC: |
082052000009 |
Weight: |
0.5 lbs |
Condition: | New |
Excellent combination kit to fold new door skins around the door frame. Consists of: Cat. No. 88160, Rubber Heel Dolly to absorb shock and provide cushioning effect and specially designed Cat. No. 89350, Door Skin Hammer to easily fold the flange on…
Brand: | S&G Tool Aid |
Part #: |
89400 |
UPC: |
0638570894004 |
Weight: |
2.4 lbs |
Condition: | New |
Use for slapping and surface metal finishing on fenders, quarter panels and trunk lids where blow is spread over full impact area. 15" overall length. Made of high grade steel, drop forged, heat treated and polished to high specifications Has blue…
Brand: | S&G Tool Aid |
Part #: |
89625 |
UPC: |
638570896251 |
Weight: |
2.36 lbs |
Condition: | New |
15" High Crown Spoon
Brand: | S&G Tool Aid |
Part #: |
89675 |
UPC: |
638570896756 |
Weight: |
2.24 lbs |
Condition: | New |
PRY AND BUMPING SPOON
Brand: | S&G Tool Aid |
Part #: |
89700 |
UPC: |
638570897005 |
Weight: |
4.6 lbs |
Condition: | New |
A handy aid for the body technician. Hit ridges directly or transfer blow with hammer. Flat surface absorbs and distributes blow evenly. Smooths out ridges uniformly without marring surface. Made of drop-forged steel.
Brand: | S&G Tool Aid |
Part #: |
89725 |
UPC: |
0638570897258 |
Weight: |
0.3 lbs |
Condition: | New |
Brand: | Martin Tools |
Part #: |
101G |
UPC: |
0697950141251 |
Weight: |
0.25 lbs |
Condition: | New |
Use to ding ridges smooth and level. When held against ridge and struck with hammer, spreads blow over large area making smooth job and preventing damage to metal or finish. Not made for prying. Length 10" overall. Face 2" x 4-5/16".
Brand: | Martin Tools |
Part #: |
1036 |
UPC: |
0697950141411 |
Weight: |
0.65 lbs |
Condition: | New |
General purpose fender and frame spoon. Heavy duty design, provides further reach on panels and behind reinforcements, prying, heavy duty design for use on SUV frames.
Brand: | Martin Tools |
Part #: |
1044 |
UPC: |
0697950946894 |
Weight: |
3.05 lbs |
Condition: | New |
General purpose fender spoon. Used as dolly behind brackets, inner panels and similar places. Handle offset to give balance when dinging and for long reach. Has high-crown working surface. Face 1-3/4" 5-1/2". Handle 1" octagon 4-3/4" long. W…
Brand: | Martin Tools |
Part #: |
1050 |
UPC: |
0697950141541 |
Weight: |
3 lbs |
Condition: | New |
Long handle permits many uses in places otherwise inaccessible. Can be driven between reinforcements and outer panel, then used to pry outward as the metal is dinged. Excellent forming and caulking tool for the deep pockets of doors, quarter-panels, …
Brand: | Martin Tools |
Part #: |
1052 |
UPC: |
0697950141558 |
Weight: |
4.45 lbs |
Condition: | New |
The answer to repair problems on high fins. A dolly, a spoon and a pry. Long handle and special contours for working up inside cramped fins. Wide spoon transmits hammer blows over wide area without damaging finish. 1" handle diameter. 19" overall len…
Brand: | Martin Tools |
Part #: |
1056 |
UPC: |
0697950141572 |
Weight: |
4.85 lbs |
Condition: | New |
Designed for _at surfaces. All the features of a toe dolly. Sizes: 43_4_21_4_11_16_
Brand: | Martin Tools |
Part #: |
1057 |
UPC: |
0697950332697 |
Weight: |
1.8 lbs |
Condition: | New |
Thinness and length provide easy accessibility to narrow pockets. Large, flat face is frequently used in shrinking and dinging flat panels. The flat sides furnish a convenient anvil for repairing flanges. Sizes 4-3/4" x 2-3/8" x 1-1/8".
Brand: | Martin Tools |
Part #: |
1058 |
UPC: |
0697950141589 |
Weight: |
3 lbs |
Condition: | New |
Provides convenient and comfortable hand hold during heaviest blows. Weight, balance and several differently crowned working faces, together with (2) beading and flange lips, give this dolly broad general use. Sizes 2-7/8" x 2-3/8" x 2-1/4".
Brand: | Martin Tools |
Part #: |
1060 |
UPC: |
0697950141619 |
Weight: |
3 lbs |
Condition: | New |
Excellent for finishing. Cross peen used for working in sharp corners around moldings and for caulking. Well balanced curved chisel for work in close places. Round face 1-9/16" diameter. Chisel 3" long.
Brand: | Martin Tools |
Part #: |
153FGB |
UPC: |
0697950375267 |
Weight: |
5.95 lbs |
Condition: | New |
Displaying 1 to 25 (of 63 products)