Lowest Prices
up to 60% off
Same Day Shipping
on most orders
30 Day Money
Back Guarantee
Center Punch
Result Pages:
Filter by Brand:
Lisle 30280 Automatic Center Punch
Automatic Firing Action. Automatic action fires to create a dimple when downward pressure is applied. No hammer is needed. Works on metal, plastic, wood and other materials. Pressure can be varied by turning the knurled knob. Hardened tool steel tip …
Lisle 30800 CV Boot Clamp Pliers
For ear-type clamps. For all ear-type clamps including GM FWD outboard CV joints. Designed for use with a torque wrench, as required for stainless steel bands.
GearWrench 82282 5/32" x 5" x 3/8" Starter Punch
Softened and tapered striking end reduces potential to chip Ground surface for ease of identification Precision harded working ends Designed for both starting and installing pins and rivets Meets or exceeds ASME B107.47 Overall Length: 5 in ASM…
GearWrench 82307 4 Pc. Long Taper Punch Set
1/8 x 8 x 3/8 Long Taper Punch 3/32 x 8-1/2 x Long Taper 3/16 x 9 x Long Taper Punch x 11 x 5/8 Long Taper Punch
Mayhew Tools 17329 Automatic Center Punch
The new CatsPaw Automatic Center Punch, from Mayhew Tools delivers an automatic spring-driven punch when pressed against a surface without the need for a hammer. When pressed against the workpiece, it stores energy in a spring and releases it as an…
Mayhew Tools 22006 3/16" Reg Line-Up Punch
Used to align holes through which rivets, pins, or bolts will be inserted Not for use when driving pins, rivets, or bolts Available in black oxide finish for additional rust protection Made in the USA
Mayhew Tools 22007 1/4 X 14" Pro Line-Up Punch
Line-up punches are used to align the holes through which rivets, pins, or bolts will be inserted, but not for driving the hardware. Sizes vary for the optimal alignment. A black oxide finish is available for rust protection. Made in the USA.
Mayhew Tools 22008 463-5/16 REG LINE UP PUNCH
Features and Benefits:
Ideal for aligning holes in metal pieces through which rivets, pins or bolts are inserted
Full finish
Made in the USA This punch is shaped like a thin rod, used to make sure holes l…
Ideal for aligning holes in metal pieces through which rivets, pins or bolts are inserted
Full finish
Made in the USA This punch is shaped like a thin rod, used to make sure holes l…
Mayhew Tools 24002 415-3/8 REG CENTER PUNCH
Features and Benefits: Designed to apply equal pressure to the end of a pin driving it straight through the hole The ball on the center of the point end assures proper contact with the pin eliminating damage to the pin or hole wall
Mayhew Tools 24003 416-1/2 REG CENTER PUNCH
Features and Benefits: Ideal for piercing or marking for starting drills in metal and other materials
Mayhew Tools 60150 Pry Bar Lady Foot Set
The ladyfoot pry bar features a rocking head that allows the operator to pry in tight spaces, while the pointed end is used for alignment The solid forged head is specially designed for ultimate strength when prying A black oxide finish covers the …
SK Hand Tool 6124 Punch Pin Long, 5/16"
Designed to remove loosened pins from assemblies, after initial loosening by a starter punch. Like all SK punches, our pin punches are hot forged in America from premium alloy steel Hardened and tempered for maximum strength and durability Indiv…
SK Hand Tool 6216 Punch Line Up Long Taper, 1/2"
Designed for use in aligning holes in metal pieces through which pins, rivets or bolts are inserted. They are not designed for driving. Hardened and tempered for maximum strength and durability Smooth finish and corrosion resistance
SK Hand Tool 6308 Punch Starter, 1/4"
Designed to loosen pins in assemblies, followed by removal with a pin punch. Strength and precision Made in the USA
SK Hand Tool 6310 Punch Starter, 5/16"
Designed to loosen pins in assemblies, followed by removal with a pin punch. Strength and precision Made in the USA
SK Hand Tool 6500 Rivet Buster Punch, 3/4"
Made in the U.S.A. from premium grade forged steel, and designed and tempered to resist splitting and mushrooming.
Tip size: 5/8"
Length: 5.36"
Tip size: 5/8"
Length: 5.36"
OTC Tools & Equipment 4605-12 1/8" Center punch
Made from durable steel alloy that can withstand everyday use.
ATD Tools 72013 Center Punch 1/4"
Made of high quality chrome vanadium steel
Each punch is hardened and tempered for maximum durability
Each punch is hardened and tempered for maximum durability
ATD Tools 72014 Center Punch 5/16"
Made of high quality chrome vanadium steel
Each punch is hardened and tempered for maximum durability
Each punch is hardened and tempered for maximum durability
ATD Tools 72015 Center Punch 3/8"
Made of high quality chrome vanadium steel
Each punch is hardened and tempered for maximum durability
Each punch is hardened and tempered for maximum durability
ATD Tools 72016 Center Punch 1/2"
Made of high quality chrome vanadium steel
Each punch is hardened and tempered for maximum durability
Each punch is hardened and tempered for maximum durability
GearWrench 371408 Center Punch, 0 mm
Width of blade 0 mm, overall length: 21.4 cm Interchangeable Punch and Chisel Tips Most popular bits with single holder Protects hands in tight access areas Blow mold case for easy storage
GearWrench 371409 Center Punch, 3 mm
Width of blade 3 mm, overall length: 21.4 cm Interchangeable Punch and Chisel Tips Most popular bits with single holder Protects hands in tight access areas Blow mold case for easy storage
GearWrench 82269 1/4" x 4-1/4" Center Punch
Softened and Tapered Striking end reduces potential to chip Ground surface for ease of identification Precision Harded working ends Used For Marking Center Lines and Pilot Drill Locations Meets or exceeds ASME B107.47
GearWrench 82270 3/8" x 5" Center Punch
Softened and tapered striking end reduces potential to chip Ground surface for ease of identification Precision harded working ends Used for marking center lines and pilot drill locations Meets or exceeds ASME B107.47 Overall Length 5 in ASME S…
Result Pages: