Lowest Prices
up to 60% off
Same Day Shipping
on most orders
30 Day Money
Back Guarantee

Result Pages:
OTC
OTC 4673

OTC Tools & Equipment 4673 Sensor Socket Set, 7pc

OTC
6-Piece Sensor Socket Set Includes: No. 4673-1 29 mm pressure / vacuum switch socket. No. 4673-2 7/8" vacuum switch socket. No. 4673-3 27 mm oil pressure sending unit socket. No. 4673-4 7/8" vacuum switch socket. No. 4673-5 1-1/16" & 1" oil pres
On Sale:

$61.56

Avail:
18 in Stock
Warehouse: US-10
Qty:
OTC
OTC 4673-6

OTC Tools & Equipment 4673-6 Heated Oxygen Sensor Socket

OTC
Heated Oxygen Sensor Socket We put a slot in the side of this wrench to accommodate connectors on heated oxygen sensors, which usually wont fit in standard sensor wrenches. The extended and reinforced body removes the most stubborn sensors without ro
On Sale:

$23.29

Avail:
9 in Stock
Warehouse: US-2
Qty:
OTC
OTC 6931

OTC Tools & Equipment 6931 Oxygen Sensor Socket

OTC
Works on all domestic and imported vehicles with oxygen sensors. Slot in sockets side allows wire clearance. Outside rib provides added strength, yet does not restrict access to sensors. 1/2" square drive, 1" male hex drive on top, 7/8" six-poi
On Sale:

$32.94

Avail:
1 in Stock
Warehouse: US-4
Qty:
OTC
OTC 7807

OTC Tools & Equipment 7807 Heated Oxygen Sensor Switch

OTC
We designed a slot in the side of this wrench to accommodate connectors on heated oxygen sensors that are too large to fit through standard O2 sensor wrenches. The extended and reinforced design removes the toughest sensors without rounding them off.
On Sale:

$60.78

Avail:
2 in Stock
Warehouse: US-2
Qty:
Lisle
Lisle 12100

Lisle 12100 Oxygen Sensor Socket

Lisle
Removes and Installs Oxygen Sensors on Most Domestic and Some Imports. Special 7/8" socket with cutaway slot to provide clearance for wire harness. Provides adequate depth to fit over sensor. Heat-treated alloy steel. Use with 3/8" square drive or 1"
On Sale:

$10.56

Avail:
52 in Stock
Warehouse: US-17
Qty:
Lisle

Lisle 12180 Soot Sensor Thread Chaser M22x 1.5

12180 Soot Sensor Thread Chaser M22. Skin Pack. Shipping wt. 4 oz. Cleans Threads in Soot Sensor Holes. Use with 7/8" hex socket or 3/8" square drive. Important: Use anti-seize
On Sale:

$9.29

Avail:
115 in Stock
Warehouse: US-2
Qty:
Lisle
Lisle 12290

Lisle 12290 NOx & Soot Sensor Socket Set

Lisle
Designed for easy access on NOx and Soot Sensors Includes 24mm & 30mm offset sockets with 1/2in drive Each socket has 6 and 12 points Works on 2014 current Ram 3.0L EcoDiesel V6 engines found in Jeep Grand Cherokee and Dodge Ram 1500 Trucks
On Sale:

$32.59

Avail:
1 in Stock
Warehouse: US-7
Qty:
Lisle
Lisle 12300

Lisle 12300 NOX Socket, 24mm

Lisle
24MM NOx & Soot Socket
On Sale:

$15.52

Avail:
21 in Stock
Warehouse: US-2
Qty:
Lisle
Lisle 12390

Lisle 12390 Dual Drive Oxygen Sensor Wrench

Lisle
Use with a Breaker Bar to Loosen Stubborn Oxygen Sensors. Tool comes with both 1/2 and 3/8 drive. Attach a 1/2 breaker bar on the end of the tool to initially loosen stuck sensors. Use a 3/8 ratchet on the top for fast removal and installation. Fits
On Sale:

$18.39

Avail:
141 in Stock
Warehouse: US-7
Qty:
KD Tools
KD Tools 3920D

GearWrench 3920D 3/8" Drive Slotted Socket for PVS, TVS & O2 Socket 7/8"

KD Tools
3/8" Drive Slotted Socket for PVS, TVS & O2 Socket 7/8" Removes and Installs Vacuum Switches with a 7/8" Hex Also Fits Some Oxygen Sensors (90mm Long) Black oxide coating to resist corrosion
On Sale:

$14.78

Avail:
6 in Stock
Warehouse: US-2
Qty:
KD Tools
KD Tools 3923D

GearWrench 3923D 3/8" Dr 1-1/16" Deep Oil Pressure Sending Socket

KD Tools
1987 and newer Chrysler vehicles with light and gauge oil pressure switches Deep well allows for up to 2-5/8" clearance (74mm long) Works on most 1991 and newer GM vehicles using oil pressure gauge: 4 Cylinder & 3.1 Liter V6
On Sale:

$5.42

Avail:
14 in Stock
Warehouse: US-2
Qty:
KD Tools
KD Tools 41720

GearWrench 41720 8 Pc. Sensor & Sending Socket Set

KD Tools
Designed for the removal and installation of oxygen sensors, oil pressure sending units, and vacuum switches Set includes: 1/2" Drive 1-13/16" (29mm) Oil Sender Socket 3/8" Drive 7/8" Slotted Socket for PVS, TVS, and O2 Socket 1/2" Drive 1-1/16"
On Sale:

$54.32

Avail:
31 in Stock
Warehouse: US-10
Qty:
Cal-Van Tools
Cal-Van Tools 843

Cal-Van Tools 843 Oxygen Sensor Wrench

Cal-Van Tools
Flex head offers essential clearance for removal or installation of oxygen sensors when it is positioned upward and inward to the floorboard or when leverage is needed around an exhaust pipe.
Designed for all oxygen sensors with 7/8 hex.
On Sale:

$25.00

Avail:
13 in Stock
Warehouse: US-2
Qty:
Schley
Schley 15510

Schley Products 15510 15500 NOX and Soot Sensor Sockets 15510 24MM 15520 30MM

Schley
This set of 12 point and 6 point 24mm and 30mm sockets is designed to remove NOX, and Particulate Matter (SOOT) sensors on cars and trucks on the road today. Applications: Chrysler, 3.0L V6 diesel, Jeep Grand Cherokee diesel motor Dodge Ram 1500 with
On Sale:

$37.42

Avail:
14 in Stock
Warehouse: US-2
Qty:
Schley

Schley Products 18900 24mm / 27mm Sensor Sockets

Set includes both 24mm and 27mm sockets with 3/8-drive Forged from alloy steel for strength and durability Compact design allows them to reach confined areas Works with sensors on import or domestic and gas or diesel engines 6-point design easily
On Sale:

$34.57

Avail:
42 in Stock
Warehouse: US-2
Qty:
Schley
Schley 67750A

Schley Products 67750A SP Grip Drive O2 Wrench

Schley
This versatile wrench has been designed for use on most oxygen sensors with electrical connectors of any size Offering maximum accessibility, this wrench removes sensors in hard-to-reach areas with the 12-point Spline Grip Drive providing optimal en
On Sale:

$64.21

Avail:
12 in Stock
Warehouse: US-2
Qty:
Schley
Schley 88750B

Schley Products 88750B SP Spline Grip Drive Oxygen Sensor Wrench, 6 and 12 Point

Schley
Includes a 12 point and 6 point SP Spline Grip Drive giving the technician the ultimate tool to remove oxygen sensors in confined areas The 12 point SP Spline Grip Drive enables the technician twice the number of clock angle attachment positions ver
On Sale:

$22.76

Avail:
6 in Stock
Warehouse: US-2
Qty:
Schley
Schley 93750B

Schley Products 93750B SP Spline Grip Drive 1-1/8 Offset Oxygen Sensor Wrench, 6 and 12 Point

Schley
Completely updated with the new SP Spline Grip Drive, this upgrade gives the technician unparalleled ability to access and remove oxygen sensors that are in confined areas.
On Sale:

$29.49

Avail:
8 in Stock
Warehouse: US-2
Qty:
OTC
Avail:
0 in Stock
Warehouse: US-2
OTC
Avail:
0 in Stock
Warehouse: US-1
OTC
Avail:
0 in Stock
Warehouse: US-1
OTC
Avail:
0 in Stock
Warehouse: US-10
OTC
OTC 6556

OTC Tools & Equipment 6556 Fuel Sender Lock Ring Wrench

OTC
Designed for removing the newly-designed 4-1/2" fuel sender lock ring on 2003 - 2011 Cadillac CTS, SRX and STS models The lock ring requires high torque to loosen and tighten, requiring a specialized tool for service Standard 3/8" square center dri
Avail:
0 in Stock
Warehouse: US-10
OTC
OTC 7189

OTC Tools & Equipment 7189 Oxygen Sensor Wrench

OTC
Oxygen Sensor Socket Designed to easily remove an oxygen sensor. Heat-treated cast steel. 7/8" hex, 1/2" square drive (double square for easy access). No. 7189 Oxygen sensor socket.
Avail:
0 in Stock
Warehouse: US-1
ATD Tools
ATD Tools 5664

ATD Tools 5664 Oxygen Sensor Wrench

ATD Tools
Flex head offers essential clearance for removal or installation of oxygen sensors when it is positioned upward and inward to the floorboard or when leverage is needed around an exhaust pipe Designed for all oxygen sensors with 7/8 hex Works on: Fo
Avail:
0 in Stock
Warehouse: US-2
Result Pages: