Lowest Prices
Free Returns
Online Since 2009


Result Pages:

Lisle 43370 Driver Handle

Lisle
For Pneumatic Fan Clutch Wrench Set (43300)
On Sale:

$51.46

Avail:
2 in Stock
Warehouse: US-7
Qty:

Lisle 45750 7 Pc. Inner Tie Rod Tool Set

Lisle
Works on tie rods with inaccessible flats Includes an additional 1-1/2" Crows Foot for Chevrolet Colorado and GMC Canyon Many inner tie rod end sockets do not have a complete hex on the full length of the socket The rounded socket ends prevent acc
On Sale:

$74.34

Avail:
2 in Stock
Warehouse: US-1
Qty:

Lisle 46000 Combination Internal-External Snap Ring Pliers

Lisle
A handy combination tool for internal and external snap rings. Compresses internal rings in one position. Move the quick-change reversing lever to expand external rings. Comes with four sets of tips, .045" straight, .060" straight, .045" 45 degree, .
On Sale:

$13.40

Avail:
1 in Stock
Warehouse: US-1
Qty:

Lisle 46160 1-1/2" crowsfoot for 45750

Works on tie rods with inaccessible flats. Utilizes nine crows feet to engage the wrench flats. Provides removal or installation of tie rods without removing rack from car. Packaged in a blow molded case. Includes the following tools:
On Sale:

$11.05

Avail:
1 in Stock
Warehouse: US-7
Qty:

OTC Tools & Equipment 6534 Shock Link and Tie Rod Separator

OTC
Shock Link and Tie Rod Separator Heres a tool that will convince even the most stubborn shock links and tie rods to part company. Just insert the tapered wedge between the seized parts, and smack the other end with a hammer. 16" long with 11/16" for
On Sale:

$17.39

Avail:
1 in Stock
Warehouse: US-4
Qty:

OTC Tools & Equipment 7503 Outer Tie Rod Remover

OTC
Outer Tie Rod Remover/Ball Joint Separator This tool is a must when youre servicing outer tie rods and ball joints. It works on imported and domestic models, front or rear wheel drive, cast or stamped-steel steering knuckles. Handles up to 5 tons of
On Sale:

$76.48

Avail:
1 in Stock
Warehouse: US-4
Qty:

OTC Tools & Equipment 7826 Ford Truck Torsion Bar Tool

OTC
Ford Truck Torsion Bar Tool This tool firmly holds the torsion bar on Ford light-duty trucks while you adjust or service the front suspension. Without it, a torsion bar could unwind and possibly cause damage. The tool fits 19972003 Ford F-150 4WD pic
On Sale:

$81.48

Avail:
6 in Stock
Warehouse: US-10
Qty:

Lisle 41350 Caster Camber Wrench 21mm

Lisle
The 14-1/2" 21mm Wrench can be used from Bottom Side of Vehicle to Move Hard-to-Reach and Often Rusty OEM Cams on 2007 and Newer GM Vehicles with Coil Spring Front Suspensions The double-offset caster wrench is used on 2007 and newer GM pickups and
Avail:
0 in Stock
Warehouse: US-10

Lisle 45810 Retainer For Master Inner Tie Rod Tool Kit (46800)

Lisle
Works on tie rods with inaccessible flats. Utilizes nine crows feet to engage the wrench flats. Provides removal or installation of tie rods without removing rack from car. Packaged in a blow molded case. Includes the following tools:
Avail:
0 in Stock
Warehouse: US-1

Lisle 46270 29mm Crow's Foot for Inner Tie Rod

Lisle
Works on the inner tie rods with inaccessible wrench flats Fits '02-'06 Camry, '99-'05 Celica, '06 Avalon Fits '97-06 Corolla, '00-'06 Prius Fits '00-'03 Highlander Fits '99-'06 Echo This Crow's Foot; is for use with 45750 inner tie rod tool.; Fits m
Avail:
0 in Stock
Warehouse: US-10

Lisle 46280 32.5mm Crow's Foot for Inner Tie Rod

Lisle
Works on the inner tie rods with inaccessible wrench flats Fits '04 Escape AWD, '05-'06 Escape 2WD and 4WD Fits 04-05 Focus Fits '99-'02 Cougar with 14"; or 15"; wheels Fits '05-'06 Mercury Mariner 2WD and 4WD This Crow's Foot; is for use with 45750
Avail:
0 in Stock
Warehouse: US-1

Lisle 46300 1-3/8" Crows Foot for LIS45750 Inner Tie Rod Tool

Lisle
1-3/8"; size for some aftermarket tie rods Works on aftermarket replacements for some "no flat" tie rods Works on tie rods with inaccessible flats The inner tie rod can be removed and installed without removing the rack
Avail:
0 in Stock
Warehouse: US-10

Lisle 46600 Universal Inner Tie Rod Wrench

Lisle
Removes inner tie rods equipped with a completely round end socket. Fits inner tie rod sockets with flats. The universal wrench is designed to remove and install all inner tie rod sockets up to 1-31/64 regardless of the rod socket configuration.
Avail:
0 in Stock
Warehouse: US-17

Lisle 54500 Large Inner Tie Rod Tool Set

Lisle
Works on inner tie rods with inaccessible wrench flats on many trucks and SUVs The long socket slips over tie rod end and crows foot engages on socket for easy removal and installation This tool comes with four crows feet, sizes 1-7/16", 33.6mm, 38
Avail:
0 in Stock
Warehouse: US-17

Lisle 54570 Crowfoot, 1-7/16"

Lisle
Replacement Crowfoot, 1-7/16" for 54500 Inner Tie Rod Tool
Avail:
0 in Stock
Warehouse: US-17

Lisle 54640 Pneumatic Tie Rod Rattler

Lisle
Loosens bolts and clamps on Tie Rods for removal or adjustment. Use with an air hammer to vibrate seized clamps and bolts on many sizes of tie rods. Works especially well on Ford F-Series trucks and SUVs. Standard .401 shank.
Avail:
0 in Stock
Warehouse: US-1
Avail:
0 in Stock
Warehouse: US-2
Avail:
0 in Stock
Warehouse: US-2

OTC Tools & Equipment 5068 Truck Tie Rod Socket

OTC
Designed to withstand the force of a 3/4" drive impact wrench, this rugged socket makes truck tie-rod end removal quick and simple. Works on inner and outer tie rod ends on 12,000 to 16,000 lb. truck axles.
Avail:
0 in Stock
Warehouse: US-10

OTC Tools & Equipment 6065 Tie Rod Socket for Medium-Duty Trucks

OTC
Tie Rod Socket for Medium-Duty Trucks Heres a heavy-duty tool for removing tie rod ends on Chrysler, Ford, and GM 1-ton trucks. It also works on many medium-duty trucks, Class 2 through 6. Accommodates a 1/2" drive impact wrench. No. 6065 Truck tie
Avail:
0 in Stock
Warehouse: US-1
Avail:
0 in Stock
Warehouse: US-10

OTC Tools & Equipment 6272 Chrysler LH Toe Adjusting Tool Set

OTC
Chrysler LH Toe Adjusting Tool Set This set enables the technician to adjust toe, to obtain a straight steering wheel, and correctly center the tie rod end. Permits easily reaching and breaking loose the tie rod jam nuts, while the entire assembly is
Avail:
0 in Stock
Warehouse: US-1

OTC Tools & Equipment 6274 Tie Rod Adjusting Tool

OTC
Adjusts tie rods on heavy-duty Ford 3/4 ton and 1-ton trucks with 1-13/16 dia. adjusting sleeves.
Avail:
0 in Stock
Warehouse: US-10

OTC Tools & Equipment 6275 Tie Rod/Pitman Arm Adjusting Set

OTC
Consists of one Pitman arm and four tie rod tools in a blow-molded storage case
Avail:
0 in Stock
Warehouse: US-10
Result Pages: