Brands Vehicles
Lowest Prices
Free Returns
Online Since 2009
JOIN GEARS TO SAVE 5%
Shop All Brands
Shopping for

1975 Chevrolet Impala

X
  2. Auto Parts
  3. Engine Components
  4. Gaskets and Sealing Systems
  5. Engine Cylinder Head Gasket for 1975 Chevrolet Impala

1975 Chevrolet Impala: Engine Cylinder Head Gasket


Displaying 1 to 25 (of 37 products)

Fel-Pro 1003 Engine Cylinder Head Gasket
for 1975 Chevrolet Impala

Fel-Pro
On Sale:

$42.53
Avail:
6 in Stock
Warehouse: US-1
Qty:
View Product
EnginePer VehicleFit NotesFitment Notes
1975 Chevrolet Impala equipped with
5.7L V8 Gas OHV
 
1
 
[Head Gasket]
0.041 Nominal Compr. Thickness
1 Per Pkg.
9.1cc Compressed Volume
Bore 4.166
Do not use on Alum. Blocks w/Liners
For Cast Iron or Alum.Heads
Minimal Alum. Head brinneling
Perf.
Pre-Flattened Steel Wire Comb. Seal
Small Chev. Listing
Steel Core Laminate Const.
 
1975 Chevrolet Impala equipped with
5.7L V8 Gas OHV [Head Gasket]
0.041 Nominal Compr. Thickness
1 Per Pkg.
9.1cc Compressed Volume
Bore 4.166
Do not use on Alum. Blocks w/Liners
For Cast Iron or Alum.Heads
Minimal Alum. Head brinneling
Perf.
Pre-Flattened Steel Wire Comb. Seal
Small Chev. Listing
Steel Core Laminate Const.
1 Per Vehicle
1975 Chevrolet Impala equipped with
6.6L V8 Gas OHV
 
1
 
[Head Gasket]
0.041 Nominal Compr. Thickness
1 Per Pkg.
9.1cc Compressed Volume
Bore 4.166
Do not use on Alum. Blocks w/Liners
For Cast Iron or Alum.Heads
Minimal Alum. Head brinneling
No Steam Holes for Street Use
Perf.
Pre-Flattened Steel Wire Comb. Seal
Small Chev. Listing
Steel Core Laminate Const.
Use on 400 Race Eng. only-up to 4.155 in. max. bore w/minimal chamfer
 
1975 Chevrolet Impala equipped with
6.6L V8 Gas OHV [Head Gasket]
0.041 Nominal Compr. Thickness
1 Per Pkg.
9.1cc Compressed Volume
Bore 4.166
Do not use on Alum. Blocks w/Liners
For Cast Iron or Alum.Heads
Minimal Alum. Head brinneling
No Steam Holes for Street Use
Perf.
Pre-Flattened Steel Wire Comb. Seal
Small Chev. Listing
Steel Core Laminate Const.
Use on 400 Race Eng. only-up to 4.155 in. max. bore w/minimal chamfer
1 Per Vehicle

Fel-Pro 501SD Engine Cylinder Head Gasket
for 1975 Chevrolet Impala

Fel-Pro
On Sale:

$31.35
Avail:
2 in Stock
Warehouse: US-1
Qty:
View Product
EnginePer VehicleFit NotesFitment Notes
1975 Chevrolet Impala equipped with
5.7L V8 Gas OHV
 
2
 
with PermaTorque Severe Duty
Head Bolts Not Included
Head Bolt Replacement Recommended
 
1975 Chevrolet Impala equipped with
5.7L V8 Gas OHV with PermaTorque Severe Duty
Head Bolts Not Included
Head Bolt Replacement Recommended

2 Per Vehicle

Fel-Pro 7733PT-2 Engine Cylinder Head Gasket
for 1975 Chevrolet Impala

Fel-Pro
On Sale:

$15.27
Avail:
1 in Stock
Warehouse: US-1
Qty:
View Product
EnginePer VehicleFit NotesFitment Notes
1975 Chevrolet Impala equipped with
5.7L V8 Gas OHV
 
2
 
Head Bolts Not Included
Head Bolt Replacement Recommended
PermaTorque Gasket Included
 
1975 Chevrolet Impala equipped with
5.7L V8 Gas OHV Head Bolts Not Included
Head Bolt Replacement Recommended
PermaTorque Gasket Included

2 Per Vehicle

Fel-Pro 7733SH-1 Engine Cylinder Head Gasket
for 1975 Chevrolet Impala

Fel-Pro
On Sale:

$12.06
Avail:
2 in Stock
Warehouse: US-1
Qty:
View Product
EnginePer VehicleFit NotesFitment Notes
1975 Chevrolet Impala equipped with
5.7L V8 Gas OHV
 
2
 
Head Bolts Not Included
Head Bolt Replacement Recommended
Embossed Steel Head Gaskets
 
1975 Chevrolet Impala equipped with
5.7L V8 Gas OHV Head Bolts Not Included
Head Bolt Replacement Recommended
Embossed Steel Head Gaskets

2 Per Vehicle

Fel-Pro 8180PT-2 Engine Cylinder Head Gasket
for 1975 Chevrolet Impala

Fel-Pro
On Sale:

$23.49
Avail:
2 in Stock
Warehouse: US-1
Qty:
View Product
EnginePer VehicleFit NotesFitment Notes
1975 Chevrolet Impala equipped with
7.4L V8 Gas OHV
 
2
 
PermaTorque Gasket Included
 
1975 Chevrolet Impala equipped with
7.4L V8 Gas OHV PermaTorque Gasket Included

2 Per Vehicle

Fel-Pro 8364PT Engine Cylinder Head Gasket
for 1975 Chevrolet Impala

Fel-Pro
On Sale:

$18.76
Avail:
1 in Stock
Warehouse: US-1
Qty:
View Product
EnginePer VehicleFit NotesFitment Notes
1975 Chevrolet Impala equipped with
6.6L V8 Gas OHV
 
2
 
Head Bolts Not Included
Head Bolt Replacement Recommended
 
1975 Chevrolet Impala equipped with
6.6L V8 Gas OHV Head Bolts Not Included
Head Bolt Replacement Recommended

2 Per Vehicle

Fel-Pro 1004 Engine Cylinder Head Gasket
for 1975 Chevrolet Impala

Fel-Pro
Avail:
0 in Stock
 OUT OF STOCK
View Product
EnginePer VehicleFit NotesFitment Notes
1975 Chevrolet Impala equipped with
5.7L V8 Gas OHV
 
1
 
[Head Gasket]
0.041 Nominal Compr. Thickness
1 Per Pkg.
9.1cc Compressed Volume
Bore 4.190
Can use on Alum. Blocks w/Liners
For Cast Iron or Alum.Heads
Minimal Alum. Head brinneling
Perf.
Small Chev. Listing
Steel Core Laminate Const. Pre-flattened Steel Wire Comb. Seal
 
1975 Chevrolet Impala equipped with
5.7L V8 Gas OHV [Head Gasket]
0.041 Nominal Compr. Thickness
1 Per Pkg.
9.1cc Compressed Volume
Bore 4.190
Can use on Alum. Blocks w/Liners
For Cast Iron or Alum.Heads
Minimal Alum. Head brinneling
Perf.
Small Chev. Listing
Steel Core Laminate Const. Pre-flattened Steel Wire Comb. Seal
1 Per Vehicle
1975 Chevrolet Impala equipped with
6.6L V8 Gas OHV
 
1
 
[Head Gasket]
0.041 Nominal Compr. Thickness
1 Per Pkg.
9.1cc Compressed Volume
Bore 4.190
Can be used on 400 Race Eng.-No Steam Holes for street use
Can use on Alum. Blocks w/Liners
For Cast Iron or Alum.Heads
Minimal Alum. Head brinneling
Perf.
Small Chev. Listing
Steel Core Laminate Const. Pre-flattened Steel Wire Comb. Seal
 
1975 Chevrolet Impala equipped with
6.6L V8 Gas OHV [Head Gasket]
0.041 Nominal Compr. Thickness
1 Per Pkg.
9.1cc Compressed Volume
Bore 4.190
Can be used on 400 Race Eng.-No Steam Holes for street use
Can use on Alum. Blocks w/Liners
For Cast Iron or Alum.Heads
Minimal Alum. Head brinneling
Perf.
Small Chev. Listing
Steel Core Laminate Const. Pre-flattened Steel Wire Comb. Seal
1 Per Vehicle

Fel-Pro 1010 Engine Cylinder Head Gasket
for 1975 Chevrolet Impala

Fel-Pro
Avail:
0 in Stock
 OUT OF STOCK
View Product
EnginePer VehicleFit NotesFitment Notes
1975 Chevrolet Impala equipped with
5.7L V8 Gas OHV
 
1
 
[Head Gasket]
0.039 Nominal Compr. Thickness
1 Per Pkg.
8.9cc Compressed Volume
Bore 4.166
Do not use on Alum. Blocks w/Liners
For Aluminum Heads only
No Alum. Head brinneling
Perf.
Pre-Flattened Steel Wire Comb. Seal
Recom. for '86-91 Corvette Alum. Heads
Small Chev. Listing
Steel Core Laminate Const.
 
1975 Chevrolet Impala equipped with
5.7L V8 Gas OHV [Head Gasket]
0.039 Nominal Compr. Thickness
1 Per Pkg.
8.9cc Compressed Volume
Bore 4.166
Do not use on Alum. Blocks w/Liners
For Aluminum Heads only
No Alum. Head brinneling
Perf.
Pre-Flattened Steel Wire Comb. Seal
Recom. for '86-91 Corvette Alum. Heads
Small Chev. Listing
Steel Core Laminate Const.
1 Per Vehicle
1975 Chevrolet Impala equipped with
6.6L V8 Gas OHV
 
1
 
[Head Gasket]
0.039 Nominal Compr. Thickness
1 Per Pkg.
8.9cc Compressed Volume
Bore 4.166
Do not use on Alum. Blocks w/Liners
For Aluminum Heads only
No Alum. Head brinneling
No Steam Holes for Street Use
Perf.
Pre-Flattened Steel Wire Comb. Seal
Recom. for '86-91 Corvette Alum. Heads
Small Chev. Listing
Steel Core Laminate Const.
Use on 400 Race Eng. only-up to 4.155 in. max. bore w/minimal chamfer
 
1975 Chevrolet Impala equipped with
6.6L V8 Gas OHV [Head Gasket]
0.039 Nominal Compr. Thickness
1 Per Pkg.
8.9cc Compressed Volume
Bore 4.166
Do not use on Alum. Blocks w/Liners
For Aluminum Heads only
No Alum. Head brinneling
No Steam Holes for Street Use
Perf.
Pre-Flattened Steel Wire Comb. Seal
Recom. for '86-91 Corvette Alum. Heads
Small Chev. Listing
Steel Core Laminate Const.
Use on 400 Race Eng. only-up to 4.155 in. max. bore w/minimal chamfer
1 Per Vehicle

Fel-Pro 1012 Engine Cylinder Head Gasket
for 1975 Chevrolet Impala

Fel-Pro
GASKET
Avail:
0 in Stock
 OUT OF STOCK
View Product
EnginePer VehicleFit NotesFitment Notes
1975 Chevrolet Impala equipped with
7.4L V8 Gas OHV
 
1
 
[Head Gasket]
0.039 Nominal Compr. Thickness
1 Per Pkg.
10.9cc Compressed Volume
Also suitable for marine apps
Bore 4.640
Can use on Mark IV (w/block mods.) & V-pass. car/truck-bowtie and Hi Perf. blocks
For Cast Iron or Alum.Heads
One open rear coolant hole in gasket. All three lower coolant holes are open
Perf.
Round Bore-will not fit some cylinder head valve pockets. Severe duty-use w/Nitrous-Turbos. Requires precision receiver groove machined in head-for engine bore up to 4.625 in
 
1975 Chevrolet Impala equipped with
7.4L V8 Gas OHV [Head Gasket]
0.039 Nominal Compr. Thickness
1 Per Pkg.
10.9cc Compressed Volume
Also suitable for marine apps
Bore 4.640
Can use on Mark IV (w/block mods.) & V-pass. car/truck-bowtie and Hi Perf. blocks
For Cast Iron or Alum.Heads
One open rear coolant hole in gasket. All three lower coolant holes are open
Perf.
Round Bore-will not fit some cylinder head valve pockets. Severe duty-use w/Nitrous-Turbos. Requires precision receiver groove machined in head-for engine bore up to 4.625 in
1 Per Vehicle

Fel-Pro 1014 Engine Cylinder Head Gasket
for 1975 Chevrolet Impala

Fel-Pro
Avail:
0 in Stock
 OUT OF STOCK
View Product
EnginePer VehicleFit NotesFitment Notes
1975 Chevrolet Impala equipped with
5.7L V8 Gas OHV
 
1
 
[Head Gasket]
0.039 Nominal Compr. Thickness
1 Per Pkg.
9.0cc Compressed Volume
Also suitable for Marine
Bore 4.200
Can use on Alum. Blocks w/Liners
For Cast Iron or Alum.Heads
Minimal Alum. Head brinneling
Perf.
Pre-Flattened Steel Wire Comb. Seal
Small Chev. Listing
Stainless Steel Core Laminate Const.
 
1975 Chevrolet Impala equipped with
5.7L V8 Gas OHV [Head Gasket]
0.039 Nominal Compr. Thickness
1 Per Pkg.
9.0cc Compressed Volume
Also suitable for Marine
Bore 4.200
Can use on Alum. Blocks w/Liners
For Cast Iron or Alum.Heads
Minimal Alum. Head brinneling
Perf.
Pre-Flattened Steel Wire Comb. Seal
Small Chev. Listing
Stainless Steel Core Laminate Const.
1 Per Vehicle
1975 Chevrolet Impala equipped with
6.6L V8 Gas OHV
 
1
 
[Head Gasket]
0.039 Nominal Compr. Thickness
1 Per Pkg.
9.0cc Compressed Volume
Also suitable for Marine
Bore 4.200
Can be used on 400 Race Eng.-Have Steam Holes for street use
Can use on Alum. Blocks w/Liners
For Cast Iron or Alum.Heads
Minimal Alum. Head brinneling
Perf.
Pre-Flattened Steel Wire Comb. Seal
Small Chev. Listing
Stainless Steel Core Laminate Const.
 
1975 Chevrolet Impala equipped with
6.6L V8 Gas OHV [Head Gasket]
0.039 Nominal Compr. Thickness
1 Per Pkg.
9.0cc Compressed Volume
Also suitable for Marine
Bore 4.200
Can be used on 400 Race Eng.-Have Steam Holes for street use
Can use on Alum. Blocks w/Liners
For Cast Iron or Alum.Heads
Minimal Alum. Head brinneling
Perf.
Pre-Flattened Steel Wire Comb. Seal
Small Chev. Listing
Stainless Steel Core Laminate Const.
1 Per Vehicle

Fel-Pro 1017-1 Engine Cylinder Head Gasket
for 1975 Chevrolet Impala

Fel-Pro
Avail:
0 in Stock
 OUT OF STOCK
View Product
EnginePer VehicleFit NotesFitment Notes
1975 Chevrolet Impala equipped with
7.4L V8 Gas OHV
 
1
 
[Head Gasket]
0.041 Nominal Compr. Thickness
1 Per Pkg.
10.9cc Compressed Volume
Bore 4.540
Both rear coolant holes are open in gasket
Can use on all Mark IV heads
For Cast Iron or Alum.Heads
Minimal Alum. Head brinneling
Perf.
Pre-flattened Steel Wire Combustion seal
Steel Core Laminate Construction
all three lower coolant holes are open
 
1975 Chevrolet Impala equipped with
7.4L V8 Gas OHV [Head Gasket]
0.041 Nominal Compr. Thickness
1 Per Pkg.
10.9cc Compressed Volume
Bore 4.540
Both rear coolant holes are open in gasket
Can use on all Mark IV heads
For Cast Iron or Alum.Heads
Minimal Alum. Head brinneling
Perf.
Pre-flattened Steel Wire Combustion seal
Steel Core Laminate Construction
all three lower coolant holes are open
1 Per Vehicle

Fel-Pro 1017-2 Engine Cylinder Head Gasket
for 1975 Chevrolet Impala

Fel-Pro
Avail:
0 in Stock
 OUT OF STOCK
View Product
EnginePer VehicleFit NotesFitment Notes
1975 Chevrolet Impala equipped with
7.4L V8 Gas OHV
 
1
 
[Head Gasket]
0.051 Nominal Comp. Thickness
1 Per Pkg
13.7cc Comp Volume
Bore 4.540
Extra Thick To Reduce Comp & To Correct Piston-Valve Clearance Problems
For Cast Iron or AlumHeads
Perf.
 
1975 Chevrolet Impala equipped with
7.4L V8 Gas OHV [Head Gasket]
0.051 Nominal Comp. Thickness
1 Per Pkg
13.7cc Comp Volume
Bore 4.540
Extra Thick To Reduce Comp & To Correct Piston-Valve Clearance Problems
For Cast Iron or AlumHeads
Perf.
1 Per Vehicle

Fel-Pro 1027 Engine Cylinder Head Gasket
for 1975 Chevrolet Impala

Fel-Pro
Avail:
0 in Stock
 OUT OF STOCK
View Product
EnginePer VehicleFit NotesFitment Notes
1975 Chevrolet Impala equipped with
7.4L V8 Gas OHV
 
1
 
[Head Gasket]
0.039 Nominal Compr. Thickness
1 Per Pkg.
9.7cc Compressed Volume
Bore 4.370
Both rear coolant holes open
For Alum. heads
Perf.
Steel Core Laminate Const.
Use on Mark IV heads
all three lower coolant holes are open
 
1975 Chevrolet Impala equipped with
7.4L V8 Gas OHV [Head Gasket]
0.039 Nominal Compr. Thickness
1 Per Pkg.
9.7cc Compressed Volume
Bore 4.370
Both rear coolant holes open
For Alum. heads
Perf.
Steel Core Laminate Const.
Use on Mark IV heads
all three lower coolant holes are open
1 Per Vehicle

Fel-Pro 1034 Engine Cylinder Head Gasket
for 1975 Chevrolet Impala

Fel-Pro
Avail:
0 in Stock
 OUT OF STOCK
View Product
EnginePer VehicleFit NotesFitment Notes
1975 Chevrolet Impala equipped with
5.7L V8 Gas OHV
 
1
 
[Head Gasket]
0.041 Nominal Compr. Thickness
1 Per Pkg.
9.3cc Compressed Volume
Bore 4.200
Can use on Alum. Blocks w/Liners
For Cast Iron or Alum.Heads
Minimal Alum. Head brinneling
Perf.
Pre-Flattened Steel Wire Comb. Seal
Small Chev. Listing
Steel Core Laminate Construction
 
1975 Chevrolet Impala equipped with
5.7L V8 Gas OHV [Head Gasket]
0.041 Nominal Compr. Thickness
1 Per Pkg.
9.3cc Compressed Volume
Bore 4.200
Can use on Alum. Blocks w/Liners
For Cast Iron or Alum.Heads
Minimal Alum. Head brinneling
Perf.
Pre-Flattened Steel Wire Comb. Seal
Small Chev. Listing
Steel Core Laminate Construction
1 Per Vehicle
1975 Chevrolet Impala equipped with
6.6L V8 Gas OHV
 
1
 
[Head Gasket]
0.041 Nominal Compr. Thickness
1 Per Pkg.
9.3cc Compressed Volume
Bore 4.200
Can use on Alum. Blocks w/Liners
For Cast Iron or Alum.Heads
Minimal Alum. Head brinneling
No Steam Holes for Street Use
Perf.
Pre-Flattened Steel Wire Comb. Seal
Small Chev. Listing
Steel Core Laminate Construction
Use on 400 Race Eng. only-up to 4.155 in. max. bore w/minimal chamfer
 
1975 Chevrolet Impala equipped with
6.6L V8 Gas OHV [Head Gasket]
0.041 Nominal Compr. Thickness
1 Per Pkg.
9.3cc Compressed Volume
Bore 4.200
Can use on Alum. Blocks w/Liners
For Cast Iron or Alum.Heads
Minimal Alum. Head brinneling
No Steam Holes for Street Use
Perf.
Pre-Flattened Steel Wire Comb. Seal
Small Chev. Listing
Steel Core Laminate Construction
Use on 400 Race Eng. only-up to 4.155 in. max. bore w/minimal chamfer
1 Per Vehicle

Fel-Pro 1037 Engine Cylinder Head Gasket
for 1975 Chevrolet Impala

Fel-Pro
Avail:
0 in Stock
 OUT OF STOCK
View Product
EnginePer VehicleFit NotesFitment Notes
1975 Chevrolet Impala equipped with
7.4L V8 Gas OHV
 
1
 
[Head Gasket]
0.039 Nominal Compr. Thickness
1 Per Pkg.
9.7cc Compressed Volume
Bore 4.370
Can use on Mark IV with block mods-fits Mark V with no mods
For Cast Iron or Alum.Heads
Minimal Alum. Head brinneling
One rear coolant hole open in gasket
Perf.
Pre-Flattened Steel Wire
Stainless Steel Core Laminate
all three lower coolant holes are open
can be used in marine apps
 
1975 Chevrolet Impala equipped with
7.4L V8 Gas OHV [Head Gasket]
0.039 Nominal Compr. Thickness
1 Per Pkg.
9.7cc Compressed Volume
Bore 4.370
Can use on Mark IV with block mods-fits Mark V with no mods
For Cast Iron or Alum.Heads
Minimal Alum. Head brinneling
One rear coolant hole open in gasket
Perf.
Pre-Flattened Steel Wire
Stainless Steel Core Laminate
all three lower coolant holes are open
can be used in marine apps
1 Per Vehicle

Fel-Pro 1043 Engine Cylinder Head Gasket
for 1975 Chevrolet Impala

Fel-Pro
Avail:
0 in Stock
 OUT OF STOCK
View Product
EnginePer VehicleFit NotesFitment Notes
1975 Chevrolet Impala equipped with
5.7L V8 Gas OHV
 
1
 
[Head Gasket]
0.039 Nominal Compr. Thickness
1 Per Pkg.
8.2cc Compressed Volume
Bore 4.080
Do not use on Alum. Blocks w/Liners
For Small Chambered Alum. Race Heads only
Minimal Alum. Head brinneling
Perf.
Pre-Flattened Steel Wire Comb. Seal
Small Chev. Listing
Steel Core Laminate Const.
Will not fit O.E. type Combustion Chambers
 
1975 Chevrolet Impala equipped with
5.7L V8 Gas OHV [Head Gasket]
0.039 Nominal Compr. Thickness
1 Per Pkg.
8.2cc Compressed Volume
Bore 4.080
Do not use on Alum. Blocks w/Liners
For Small Chambered Alum. Race Heads only
Minimal Alum. Head brinneling
Perf.
Pre-Flattened Steel Wire Comb. Seal
Small Chev. Listing
Steel Core Laminate Const.
Will not fit O.E. type Combustion Chambers
1 Per Vehicle
1975 Chevrolet Impala equipped with
6.6L V8 Gas OHV
 
1
 
[Head Gasket]
0.039 Nominal Compr. Thickness
1 Per Pkg.
8.2cc Compressed Volume
Bore 4.080
Do not use on Alum. Blocks w/Liners
For Small Chambered Alum. Race Heads only
Minimal Alum. Head brinneling
Not for use on 400 Race Eng. and has no provisions for Steam Holes
Perf.
Pre-Flattened Steel Wire Comb. Seal
Small Chev Listing
Steel Core Laminate Const.
Will not fit O.E. type Combustion Chambers
 
1975 Chevrolet Impala equipped with
6.6L V8 Gas OHV [Head Gasket]
0.039 Nominal Compr. Thickness
1 Per Pkg.
8.2cc Compressed Volume
Bore 4.080
Do not use on Alum. Blocks w/Liners
For Small Chambered Alum. Race Heads only
Minimal Alum. Head brinneling
Not for use on 400 Race Eng. and has no provisions for Steam Holes
Perf.
Pre-Flattened Steel Wire Comb. Seal
Small Chev Listing
Steel Core Laminate Const.
Will not fit O.E. type Combustion Chambers
1 Per Vehicle

Fel-Pro 1044 Engine Cylinder Head Gasket
for 1975 Chevrolet Impala

Fel-Pro
Avail:
0 in Stock
 OUT OF STOCK
View Product
EnginePer VehicleFit NotesFitment Notes
1975 Chevrolet Impala equipped with
5.7L V8 Gas OHV
 
1
 
[Head Gasket]
0.051 Nominal Compr. Thickness
1 Per Pkg.
11.2cc Compressed Volume
Bore 4.200
Can use on Alum. Blocks w/Liners
Extra Thick Steel Core Laminate Const.
Extra thick to reduce compression and correct piston-head clearance problems
For Cast Iron or Alum.Heads
Minimal Alum. Head brinneling
Perf.
Pre-Flattened Steel Wire Const.
Small Chev. Listing
 
1975 Chevrolet Impala equipped with
5.7L V8 Gas OHV [Head Gasket]
0.051 Nominal Compr. Thickness
1 Per Pkg.
11.2cc Compressed Volume
Bore 4.200
Can use on Alum. Blocks w/Liners
Extra Thick Steel Core Laminate Const.
Extra thick to reduce compression and correct piston-head clearance problems
For Cast Iron or Alum.Heads
Minimal Alum. Head brinneling
Perf.
Pre-Flattened Steel Wire Const.
Small Chev. Listing

1 Per Vehicle
1975 Chevrolet Impala equipped with
6.6L V8 Gas OHV
 
1
 
[Head Gasket]
0.051 Nominal Compr. Thickness
1 Per Pkg.
11.2cc Compressed Volume
Bore 4.200
Can be used on 400 Race Eng.-Have Steam Holes for street use
Can use on Alum. Blocks w/Liners
Extra Thick Steel Core Laminate Const.
Extra thick to reduce compression and correct piston-head clearance problems
For Cast Iron or Alum.Heads
Minimal Alum. Head brinneling
Perf.
Pre-Flattened Steel Wire Const.
Small Chev. Listing
 
1975 Chevrolet Impala equipped with
6.6L V8 Gas OHV [Head Gasket]
0.051 Nominal Compr. Thickness
1 Per Pkg.
11.2cc Compressed Volume
Bore 4.200
Can be used on 400 Race Eng.-Have Steam Holes for street use
Can use on Alum. Blocks w/Liners
Extra Thick Steel Core Laminate Const.
Extra thick to reduce compression and correct piston-head clearance problems
For Cast Iron or Alum.Heads
Minimal Alum. Head brinneling
Perf.
Pre-Flattened Steel Wire Const.
Small Chev. Listing

1 Per Vehicle

Fel-Pro 1045 Engine Cylinder Head Gasket
for 1975 Chevrolet Impala

Fel-Pro
GASKET
Avail:
0 in Stock
 OUT OF STOCK
View Product
EnginePer VehicleFit NotesFitment Notes
1975 Chevrolet Impala equipped with
5.7L V8 Gas OHV
 
1
 
[Head Gasket]
0.039 Nominal Compr. Thickness
1 Per Pkg.
9.0cc Compressed Volume
Bore 4.180
Can use on Alum. Blocks w/Liners
For Cast Iron or Alum.Heads
For Severe Duty (Nitrous-Turbos)
Loc-Wire (Steel Wire) Comb. Seal
Perf.
Requires Precision reciever groove machined in head
Small Chev. Listing
Stainless-Steel Core Laminate Const.
 
1975 Chevrolet Impala equipped with
5.7L V8 Gas OHV [Head Gasket]
0.039 Nominal Compr. Thickness
1 Per Pkg.
9.0cc Compressed Volume
Bore 4.180
Can use on Alum. Blocks w/Liners
For Cast Iron or Alum.Heads
For Severe Duty (Nitrous-Turbos)
Loc-Wire (Steel Wire) Comb. Seal
Perf.
Requires Precision reciever groove machined in head
Small Chev. Listing
Stainless-Steel Core Laminate Const.
1 Per Vehicle
1975 Chevrolet Impala equipped with
6.6L V8 Gas OHV
 
1
 
[Head Gasket]
0.039 Nominal Compr. Thickness
1 Per Pkg.
9.0cc Compressed Volume
Bore 4.180
Can be used on 400 Race Eng.-Have Steam Holes for street use
Can use on Alum. Blocks w/Liners
For Cast Iron or Alum.Heads
For Severe Duty (Nitrous-Turbos)
Loc-Wire (Steel Wire) Comb. Seal
Perf.
Requires Precision reciever groove machined in head
Small Chev. Listing
Stainless-Steel Core Laminate Const.
 
1975 Chevrolet Impala equipped with
6.6L V8 Gas OHV [Head Gasket]
0.039 Nominal Compr. Thickness
1 Per Pkg.
9.0cc Compressed Volume
Bore 4.180
Can be used on 400 Race Eng.-Have Steam Holes for street use
Can use on Alum. Blocks w/Liners
For Cast Iron or Alum.Heads
For Severe Duty (Nitrous-Turbos)
Loc-Wire (Steel Wire) Comb. Seal
Perf.
Requires Precision reciever groove machined in head
Small Chev. Listing
Stainless-Steel Core Laminate Const.
1 Per Vehicle

Fel-Pro 1047 Engine Cylinder Head Gasket
for 1975 Chevrolet Impala

Fel-Pro
Avail:
0 in Stock
 OUT OF STOCK
View Product
EnginePer VehicleFit NotesFitment Notes
1975 Chevrolet Impala equipped with
7.4L V8 Gas OHV
 
1
 
[Head Gasket]
0.039 Nominal Compr. Thickness
1 Per Pkg.
10.5cc Compressed Volume
Bore 4.540
Can use on Mark IV with block mods-fits Mark V with no mods
For Cast Iron or Alum.Heads
Minimal Alum. Head brinneling
One rear coolant hole open in gasket
Perf.
Pre-Flattened Steel Wire
Stainless Steel Core Laminate
all three lower coolant holes are open
can be used in marine apps
 
1975 Chevrolet Impala equipped with
7.4L V8 Gas OHV [Head Gasket]
0.039 Nominal Compr. Thickness
1 Per Pkg.
10.5cc Compressed Volume
Bore 4.540
Can use on Mark IV with block mods-fits Mark V with no mods
For Cast Iron or Alum.Heads
Minimal Alum. Head brinneling
One rear coolant hole open in gasket
Perf.
Pre-Flattened Steel Wire
Stainless Steel Core Laminate
all three lower coolant holes are open
can be used in marine apps
1 Per Vehicle

Fel-Pro 1057 Engine Cylinder Head Gasket
for 1975 Chevrolet Impala

Fel-Pro
Avail:
0 in Stock
 OUT OF STOCK
View Product
EnginePer VehicleFit NotesFitment Notes
1975 Chevrolet Impala equipped with
7.4L V8 Gas OHV
 
1
 
[Head Gasket]
0.041 Nominal Compr. Thickness
1 Per Pkg.
11.3cc Compressed Volume
Bore 4.630
Both rear coolant holes open in gasket
For Cast Iron or Alum.Heads
Mark IV head config.
Minimal Alum. Head brinneling
Perf.
Pre-Flattened Steel Wire
Steel Core Laminate
X-large bore-not recommended for engine bore 4.625 in. or larger
all three lower coolant holes are open
 
1975 Chevrolet Impala equipped with
7.4L V8 Gas OHV [Head Gasket]
0.041 Nominal Compr. Thickness
1 Per Pkg.
11.3cc Compressed Volume
Bore 4.630
Both rear coolant holes open in gasket
For Cast Iron or Alum.Heads
Mark IV head config.
Minimal Alum. Head brinneling
Perf.
Pre-Flattened Steel Wire
Steel Core Laminate
X-large bore-not recommended for engine bore 4.625 in. or larger
all three lower coolant holes are open
1 Per Vehicle

Fel-Pro 1067 Engine Cylinder Head Gasket
for 1975 Chevrolet Impala

Fel-Pro
Head Gasket
Avail:
0 in Stock
 OUT OF STOCK
View Product
EnginePer VehicleFit NotesFitment Notes
1975 Chevrolet Impala equipped with
7.4L V8 Gas OHV
 
1
 
[Head Gasket]
.039 Comp. Thickness
11.3cc Compressed Volume
Bore 4.630
Cast Iron Or Alum. Heads
Extra Large Bore
Not Recom. For Bore 4.625 Or Larger
Perf.
Pre-Flattened Steel Wire
Stainless Steel Core Laminate
 
1975 Chevrolet Impala equipped with
7.4L V8 Gas OHV [Head Gasket]
.039 Comp. Thickness
11.3cc Compressed Volume
Bore 4.630
Cast Iron Or Alum. Heads
Extra Large Bore
Not Recom. For Bore 4.625 Or Larger
Perf.
Pre-Flattened Steel Wire
Stainless Steel Core Laminate

1 Per Vehicle

Fel-Pro 1093 Engine Cylinder Head Gasket
for 1975 Chevrolet Impala

Fel-Pro
GASKET
Avail:
0 in Stock
 OUT OF STOCK
View Product
EnginePer VehicleFit NotesFitment Notes
1975 Chevrolet Impala equipped with
7.4L V8 Gas OHV
 
1
 
[Head Gasket]
0.051 Nominal Compr. Thickness
1 Per Pkg.
13.9cc Compressed Volume
Bore 4.620
For cast iron or Alum. Heads-Round Bore-will not fit some cyl. head valve pockets
Minimal Alum. Head brinneling
One rear coolant hole open
Perf.
Pre-Flattened Steel Wire Comb. Seal
Steel Core Laminate Const.
Use on Mark IV truck or bowtie blocks or Mark V
for PRO STOCK Buick-Chev-Olds-Pont. Engs w/Chev bolt pattern
three lower coolant holes open
 
1975 Chevrolet Impala equipped with
7.4L V8 Gas OHV [Head Gasket]
0.051 Nominal Compr. Thickness
1 Per Pkg.
13.9cc Compressed Volume
Bore 4.620
For cast iron or Alum. Heads-Round Bore-will not fit some cyl. head valve pockets
Minimal Alum. Head brinneling
One rear coolant hole open
Perf.
Pre-Flattened Steel Wire Comb. Seal
Steel Core Laminate Const.
Use on Mark IV truck or bowtie blocks or Mark V
for PRO STOCK Buick-Chev-Olds-Pont. Engs w/Chev bolt pattern
three lower coolant holes open
1 Per Vehicle

Fel-Pro 1094 Engine Cylinder Head Gasket
for 1975 Chevrolet Impala

Fel-Pro
Avail:
0 in Stock
 OUT OF STOCK
View Product
EnginePer VehicleFit NotesFitment Notes
1975 Chevrolet Impala equipped with
5.7L V8 Gas OHV
 
1
 
[Head Gasket]
0.015 Nominal Compr. Thickness
1 Per Pkg.
3.2cc Compressed Volume
Bore 4.100
Do not use on Alum. Blocks w/Liners
Embossed Shim w/precision rubber coating Const. and Comb. Seal
For Cast Iron or Alum.Heads
No Alum. Head brinneling
Perf.
Small Chev. Listing
Use in some sportsman drag race and flat top piston oval track catagories
 
1975 Chevrolet Impala equipped with
5.7L V8 Gas OHV [Head Gasket]
0.015 Nominal Compr. Thickness
1 Per Pkg.
3.2cc Compressed Volume
Bore 4.100
Do not use on Alum. Blocks w/Liners
Embossed Shim w/precision rubber coating Const. and Comb. Seal
For Cast Iron or Alum.Heads
No Alum. Head brinneling
Perf.
Small Chev. Listing
Use in some sportsman drag race and flat top piston oval track catagories
1 Per Vehicle
1975 Chevrolet Impala equipped with
6.6L V8 Gas OHV
 
1
 
[Head Gasket]
0.015 Nominal Compr. Thickness
1 Per Pkg.
3.2cc Compressed Volume
Bore 4.100
Do not use on Alum. Blocks w/Liners
Embossed Shim w/precision rubber coating Const. and Comb. Seal
For Cast Iron or Alum.Heads
No Alum. Head brinneling
Not for use on 400 Race Eng. and has no provisions for Steam Holes
Perf.
Small Chev. Listing
Use in some sportsman drag race and flat top piston oval track catagories
 
1975 Chevrolet Impala equipped with
6.6L V8 Gas OHV [Head Gasket]
0.015 Nominal Compr. Thickness
1 Per Pkg.
3.2cc Compressed Volume
Bore 4.100
Do not use on Alum. Blocks w/Liners
Embossed Shim w/precision rubber coating Const. and Comb. Seal
For Cast Iron or Alum.Heads
No Alum. Head brinneling
Not for use on 400 Race Eng. and has no provisions for Steam Holes
Perf.
Small Chev. Listing
Use in some sportsman drag race and flat top piston oval track catagories
1 Per Vehicle

Fel-Pro 502SD Engine Cylinder Head Gasket
for 1975 Chevrolet Impala

Fel-Pro
Avail:
0 in Stock
 OUT OF STOCK
View Product
EnginePer VehicleFit NotesFitment Notes
1975 Chevrolet Impala equipped with
7.4L V8 Gas OHV
 
2
 
with PermaTorque Severe Duty
 
1975 Chevrolet Impala equipped with
7.4L V8 Gas OHV with PermaTorque Severe Duty

2 Per Vehicle

Fel-Pro 8651PT Engine Cylinder Head Gasket
for 1975 Chevrolet Impala

Fel-Pro
Avail:
0 in Stock
 OUT OF STOCK
View Product
EnginePer VehicleFit NotesFitment Notes
1975 Chevrolet Impala equipped with
5.7L V8 Gas OHV
 
2
 
with High Performance Engine
Head Bolts Not Included
Head Bolt Replacement Recommended
 
1975 Chevrolet Impala equipped with
5.7L V8 Gas OHV with High Performance Engine
Head Bolts Not Included
Head Bolt Replacement Recommended

2 Per Vehicle
Displaying 1 to 25 (of 37 products)