Description:
Building on decades of experience using reverse engineering to remanufacture automotive motors, CARDONE engineers have meticulously designed and tested our brand-new transfer case motors to match O.E. fit and performance. Each unit is load-tested to ensure the torque power specification meets industry standards. As a direct-fit O.E. replacement, CARDONE New Transfer Case Motors provide ease of installation and reliability you can count on.
Features and Benefits:
- Designed to give the precise amount of power to the transmission for a smooth transition when changing from 2-wheel drive to 4-wheel drive.
- Designed to match O.E. fit and function for easy installation.
- Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
- Load testing ensures torque power specification meets industry standards.
Specifications:
Contains Electronic Components?:
No
FAA_A1:
Do not operate the motor while it is off the transfer case. This can damage the motor and set an error code that must be cleared before the motor will operate again. Shift the transfer case into the position of the motor to install.
FAA_A2:
Yes, the transfer case should be manually shifted into the two-wheel drive position at the shift shaft before the installation of the replacement motor. Typically the positions are spring-loaded and can be rotated manually.
FAA_A3:
A crescent wrench can be used for this operation.
FAA_A4:
The replacement motor drive is factory-set in the 2 wheel drive position.
FAA_A5:
This may be caused by a transfer case control module calibration issue. Check for DTC's and calibration version there may be a software update from the Original Equipment Manufacturer. If the motor attempts to shift, but sounds weak, check the front axle lock actuator. If the axle lock does not engage, the motor cannot complete its engagement.
Is or contains a battery?:
No
Is or contains a bulb?:
No
Is the item CARB affected?:
No
Mounting Hardware Included:
No
Mounting Hole Quantity:
3
Package Contents:
Transfer Case Motor; Instruction Sheet
Shift Operation Type:
Electronic
Sprocket Tooth Quantity:
3
Wiring Harness Included:
Yes
Wiring Harness Length:
12.5 in.
Wiring Harness Length:
317.5 mm
