Description:
CARDONE Remanufactured Transfer Case Motors are designed to meet or exceed O.E. performance. Reverse engineering provides insight into how and why the unit originally failed, allowing our engineers to identify and correct original design weaknesses. Each unit is 100% computer tested at three points during the remanufacturing process to ensure reliability. CARDONE is committed to getting your vehicle back to peak performance with our direct-replacement transfer case motors.
Features and Benefits:
- All motors are 100% torque tested to ensure strength for proper gear engagement.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Each unit is 100% computer tested at 3 points during the remanufacturing process for guaranteed performance.
- Every motor is assembled with the precise amount of lubricant to ensure quiet operation and long life.
- Motor magnets are 100% recharged for superior performance and reliability.
- Transfer case motor sensors are 100% replaced with new, O.E.-quality sensors for superior performance and long product life.
Specifications:
Contains Electronic Components?:
No
FAA_A1:
Do not operate the motor while it is off the transfer case. This can damage the motor and set an error code that must be cleared before the motor will operate again. Shift the transfer case into the position of the motor to install.
FAA_A2:
Yes, the transfer case should be manually shifted into the two-wheel drive position at the shift shaft before the installation of the replacement motor. Typically the positions are spring-loaded and can be rotated manually.
FAA_A3:
A crescent wrench can be used for this operation.
FAA_A4:
The replacement motor drive is factory-set in the 2 wheel drive position.
FAA_A5:
This may be caused by a transfer case control module calibration issue. Check for DTC's and calibration version there may be a software update from the Original Equipment Manufacturer.
Is or contains a battery?:
No
Is or contains a bulb?:
No
Is the item CARB affected?:
No
Mounting Hardware Included:
No
Mounting Hole Quantity:
3
Package Contents:
Transfer Case Motor; Instruction Sheet
Product Condition:
Remanufactured
Shift Operation Type:
Electronic
Sprocket Tooth Quantity:
3
Wiring Harness Included:
Yes
Wiring Harness Length:
14 in.
Wiring Harness Length:
355.6 mm
Manufacturer Warranty:
12 Months
