Description:
Our new calipers are manufactured using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. As a direct-fit component, our new zinc coated calipers provide hassle-free installation and long-term reliability.
Features and Benefits:
- Engineered to meet or exceed O.E. performance.
- Every unit is 100% tested to ensure reliable performance.
- Ideal for commercial use as well as performance vehicles.
- No core return required.
- Zinc plating offers a silver O.E.-like finish.
Specifications:
Abutment Clips Included:
No
Anti-Rattle Spring Included:
No
Bleeder Screw Included:
Yes
Bleeder Screw Quantity:
1
Bleeder Thread Size:
M10x1.0
Caliper Casting Material:
Cast Iron
Caliper Finish:
Zinc Plated
Caliper Slides Included:
Yes
Contains Electronic Components?:
No
FAA_A1:
Not recommended. The O.E. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. It is recommended that the installer follow the manufacturers recommendations.
FAA_A2:
As a rule, always use brake fluid recommended by O.E. The fluid type is stamped on the master cylinder reservoir lid. Always use new fluid in a sealed container.
FAA_A3:
Inspect both calipers for binding or sticky slides or pins. Also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation.
FAA_A4:
Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish.
FAA_A5:
A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder.
FAA_A6:
A silicone grease is used on floating caliper mounting pins.
FAA_A7:
New hardware is included with all of our Calipers however the mounting bracket is an added option depending on part number and application. Mounting Brackets are also sold separately for most applications.
Inlet Fitting Type:
Banjo
Is or contains a battery?:
No
Is or contains a bulb?:
No
Is the item CARB affected?:
No
Mounting Bolt Included:
Yes
Mounting Bracket Included:
No
Mounting Hardware Included:
Yes
Mounting Hole Diameter:
0.725 in.
Mounting Hole Thread Diameter:
0.725 in.
Package Contents:
Caliper; Instruction Sheet; Hardware Kit
Pad Wear Sensor Included:
Yes
Piston Diameter:
1.89 in.
Piston Diameter:
47.88 mm
Piston Material:
Phenolic
Rust Resistant Coating:
Yes
Lincoln (cars) #:
3W1Z2552AA
Lincoln (cars) #:
3W1Z2552CA
Lincoln (cars) #:
6W1Z2552AA
Lincoln (cars) #:
7W1Z2552B
