Cups
Displaying 1 to 19 (of 19 products)
Sharpe 6610 No-Drip Cup Assembly - Model 450
No-Drip Siphon Spray Gun Cup Assembly Will not spill in any spraying position. Eliminates accidental spills and damaged work. Attachment thread 3/8 f.p.t. (swivel nut). One-quart capacity.
ATD Tools 6863 0.6L Plastic Cup for ATD-6860
Replacement cup for gravity feed spray guns. Wont drip when spraying in any position. Standard fluid connection. No accidental spills or damaged work.
ATD Tools 6878 0.25L Aluminum Cup for ATD-6835
Replacement cup for ATD-6835 spray guns. Wont drip when sprayingin any position. Standard fluid connection. No accidental spills or damaged work.
Astro Pneumatic GF14C 600cc (1pt. 4oz.) Plastic Cup Assembly
Plastic Gravity Feed Cup - .6 Liter Capacity
ATD Tools PRT6900-09 Cup For ATD-6901 & 6902
Cup Lid for Top Coat Spray Gun
3M Company 16023 PPS Mixing Cups and Collars, Large, box of 1
Large hard cup that supports and holds the PPS large flexible liner, part number 16024. If filled to the top, this cup will hold 32 fl oz.
3M Company 16028 PPS 3 oz. Lids and Disposable Liners Kit
Kit contains 50 disposable lids with 200 micron filters, 50 liners, and 20 sealing plugs The 200 micron filters are recommended for traditional solvent based paint or primer applications Note: mix ratio insert sold separately For use with part num…
3M Company 16065 PPS Mix Ratio Insert - Generic, 100 per box
Mix ratio printed on film insert. For common paint mixes. For use with the 650 mL cup. Used with 1:1, 2:1:1, 4:1:1, 6:1:1, and 8:1:1 ratios and 3M Tri-Scale. Tip: Film inserts must be placed between the hard cup and flexible liner.
3M Company 16122 PPS Midi Cup & Collar, 400 mL
Midi's 400mL or 13.5 ounce size is ideal for painters to mix paint (primer, sealer, base and clear coats) for two-panel repairs. 3M PPS has the ability to reduce solvent use by up to 70 percent from traditional gravity cups You can reduce cycle t…
3M 16124 PPS Type H/O Pressure Cup
This product is intended for use in place of metal cups on most pressure cup guns Setting up the Type H/O pressure cup vs standard PPS is connecting the pressure hose from the cup port to the pressure port on the spray gun, or spray gun regulator S…
3M 16236 PPS Magnetic Spray Gun Holder, Single Gun
Magnetic spray gun holder for 3M Paint Preparation System and Accuspray System spray guns Mounts using built-in magnets Re-drilled for optional screw mounting
Displaying 1 to 19 (of 19 products)