Lowest Prices
up to 60% off
Same Day Shipping
on most orders
30 Day Money
Back Guarantee
Slide Hammer Pullers
Result Pages:
Filter by Brand:
OTC Tools & Equipment 1156 puller slide hammer 2-1/2lb with threaded end
Ideal for pulling jobs in very close quarters, as in removal of small bore bushings, bearings, oil seals, etc. Internal pulling attachment has jaw spread of 1/2 to 1-3/8, adjusted by turning slide hammer handle. Handle end has a 1/2-20 thread.<…
OTC Tools & Equipment 1176 Reversible Jaw Slide Hammer Puller
Reversible-Jaw Slide Hammer Puller Extremely versatile puller, which will accomplish many pulling jobs involving gears, bearings, outer races, grease retainers, oil seals, etc. Either two or three puller jaws may be used to handle inside pulling j…
OTC Tools & Equipment 1200 Manual Sleeve Puller Set
Sleeve Puller / Installer Sets: These sets work on a wide array of truck, bus, and tractor engines, as well as those in other vehicles. They'll handle wet and dry sleeves - and you won't need to remove head studs. Save time, effort, and money. - Choi…
OTC Tools & Equipment 4579 9-Way Slide Hammer Puller Set
5 lbs hammer Pulls flange-type rear axles and most front-wheel drive hubs Set also includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements
OTC Tools & Equipment 4581 Stinger Blind Hole Bearing Puller Set
Blind Hole Bearing Puller Set For pulling jobs requiring an internal pull. Set includes four collets, which fit a wide range of applications. Select the appropriate sized collet by comparing it with the application. Insert the collet, expand it to …
OTC Tools & Equipment 5028 Slide Hammer Puller
Just 8-1/2" long to fit into tight spots, but its 1-1/2 pound hammer gives you a little extra muscle for stubborn jobs. It's perfect for pulling injector nozzles. The shank is threaded 1/2" 20 and has a 5/8" 18 threaded adapter included. Works with m…
OTC Tools & Equipment 6501 Basic slide hammer, 1-3/4 lb. Hammer
Basic Slide Hammer May be used with an internal pulling attachment or with internal or external-internal threaded adapters. 6501 Basic slide hammer unit is 17" long with a 1-3/4 lb. hammer and a 1/2"-20 threaded end.
OTC Tools & Equipment 6541 Pulling Hook
This slide hammer puller attachment is used to remove seals, bearings, and other press-fit parts. Designed to be used with OTC No. 1155 (5 lb.) or No. 1156 (2-1/2 lb.) slide hammer, or other slide hammers having 5/8-18 threads
OTC Tools & Equipment 7703 10 Lbs Slide Hammer Puller
Ten-Pound Slide Hammer Puller This heavy-duty slide hammer puller gets tough with those really stuck parts. It has all the features of our smaller versions heat treated, 24" long, and a 5/8"18 threaded end to adapt to most pulling attachments. The d…
Astro Pneumatic 78410 Adjustable Blind Inner Bearing Slide Hammer Puller
For bearings and bushings with 0.75 2.3" inside diameter or up to 2.0" when pulling from outside diameter Jaws remain in a straight extended orientation when adjusted and are made from forged CR-V 2.5 lb. sliding hammer, 5.9 lbs. total weight Mat…
Astro Pneumatic 78415 Locking Pliers Slide Hammer Puller
Includes at least 120pcs of steel zin Universal puller for locking onto and hammering to remove everything from cotter pins to old seals and bushings Quick detachable swivel end allows for adjusting and locking pliers on subject then attaching slidi…
GearWrench 3591D 24" Slide Hammer
5 lb hammer 5/8" - 18 threaded end May be used with an internal pulling attachment with female or male female threaded adapters
GearWrench 41700D 10 Way Slide Hammer Puller Set
Provides a wide range of puller applications such as: flange type axles, oil seals and other press fit parts Jaws can be set up for 2 or 3 jaw internal or external pulling jobs Includes blow mold case for storage and organization
Sunex Tools 3911 5 Lbs Slide Hammer Puller Set
Includes: 5 lb. heavy-duty slide hammer 8-function int. or ext. 3 jaw puller Internal or external 2-jaw puller Puller hook Rear axle puller Dent puller Special grip wrench adaptor: 1.75 cm
S & G Tool Aid 66370 10 Lbs Slide Hammer & Pullers for Front Wheel Hubs and Rear Axles
Heavy duty 10 lb. Slide Hammer on Steel Shaft reduces effort, time and labor to make a tough job easy Pullers fit 4, 5 and 6 bolt patterns for use on most domestic and imported cars and light trucks Easily removes front wheel hubs and flange type r…
S & G Tool Aid 81000 The Slugger Heavy-Duty Slide Hammer
10 lb. slide weight designed for in-line impact. Balanced for continued use without fatigue. Special hand-fit weight for ease of work. The most complete set available! 10 of the latest and most modern engineered body pulling and pushing attachments…
S & G Tool Aid 81100 The Slugger Heavy-Duty Slide Hammer with Carrying Case
Slugger 10 LBS Slide Hammer Kit in Box
S & G Tool Aid 81200 Midi-Weight Slide Hammer Dent Puller
Provides excellent balance with 5lb. slide weight on plated, solid, 5/8" shaft. Exclusive soft cushion vinyl grip with "Hang-It" hole absorbs shock. Broached nose cone locks puller screw firmly in place. Supplied with body hook of heavy duty aircraft…
S & G Tool Aid 81400 Dent Puller and Slide Hammer
The largest selling and most economical body shop dent puller in the industry. 3lb. slide weight is mounted on 12" plated steel shaft. Famous blue vinyl hand grip over steel handle reduces sting on technicnian's hands and provides 100% grip. Broached…
S & G Tool Aid 81500 Junior Slugger Slide Hammer Dent Puller
Heavy duty slide hammer with 3 lb. slide weight Soft vinyl Hang-It handle grip for easy storage and shock cushioning
Result Pages: