Lowest Prices
up to 60% off
Same Day Shipping
on most orders
30 Day Money
Back Guarantee
Miscellaneous
Filter by Brand:
OTC Tools & Equipment 1042 Grip-O-Matic Puller 13-Ton, Long 2/3-Jaw
Mechanical Grip-O-Matic Puller Remove and install parts for fast, effective repairs. The puller is forged from quality steel, heat treated, and subjected to rigorous tests which exceed their rated capacity. No. 1042 13-Ton, Long 2/3-Jaw Max. Reac…
OTC Tools & Equipment 1127 Bearing Splitter
Bearing Splitter Feature knife-like edges which are easily placed behind the part to secure a gripping surface, even when clearances are extremely limited. When used with an OTC Grip-O-Matic puller, puller jaws grip attachments outer edge; when us…
OTC Tools & Equipment 1172 Pilot Bearing Puller
Pilot Bearing Puller This puller is built specially for inside pulling jobs, and particularly for removing flywheel pilot bearings on automobiles, trucks, and tractors. Also very practical for pulling motor, generator, and magneto bearings. 1172 …
OTC Tools & Equipment 1173 Special Slide Hammer Puller
Special Slide Hammer Puller Ideal for pulling jobs in very close quarters, as in removal of small-bore bushings, bearings, oil seals, etc. Internal pulling attachment has a jaw spread of 1/2" to 1-3/8", adjusted by turning the slide hammer handle. Ha…
OTC Tools & Equipment 1174 Head assembly only for 1173 Slide Hammer
Head assembly only for 1173 Slide Hammer Jaw spread of 1/2" to 1-3/8", adjusted by turning the slide hammer handle. Fits handle end with a 1/2"20 thread. No. 1174 Head assembly only.
OTC Tools & Equipment 1205 Universal Wet-Type Sleeve Puller
This tool does the job faster than ordinary sleeve pullers because set-up time is slashed, in most cases job time will average two minutes per cylinder. Special adapters are not needed. Includes 5 lb. slide hammer assembly and adjustable jaws fit sle…
OTC Tools & Equipment 24544 3-Way Cross Head for OTC-1178 Slide Hammer Puller
3-way cross head for OTC-1178 Slide Hammer Puller.
OTC Tools & Equipment 24832 Puller Screw
5/8"-18. Use w/ OTC No. 1150, 1151, 1152, & 1153 pulling attachment. Acts as a regular forcing screw when threaded directly into block of pulling attachment.
OTC Tools & Equipment 24835 Puller Screw
Puller Screw No. 24835 5-1/2" long Internal thread of tapped cross block. 5/8"18 Use with Nos. 1150, 1152, and 1153. Acts as a regular forcing screw when threaded directly into the block of pulling attachment.
OTC Tools & Equipment 32937 Extra Puller Leg for OTC7394 Hub Puller
Jaw Hub Puller Leg for 6574/7394 Hub Puller
OTC Tools & Equipment 5881 Cam Gear Alignment Fixture
This tool pulls the cam drive gear hub and thrust plate forward for camshaft and/or thrust plate seal removal and installation. For use on Detroit Diesel Series 60 engines. Similar to J-35906 and J-35906-6A. Using this tool eliminates the need to re…
OTC Tools & Equipment 6069 Cummins Diesel Fuel Injector Remover Kit
Cummins Diesel Fuel Injector Remover Kit Kit contains a fuel injector connector tube remover and fuel injector puller. The fuel injector connector tube must be removed before removal of the injector, or both will be damaged. Application: 1998-1/22002…
OTC Tools & Equipment 6676 Heavy-Duty Wiper Arm Puller
Designed to remove aluminum arm from steel stud, which often galvanizes and locks arm and stud together. Investment cast design is strong, easier to usesaves time Live center end allows for more precise alignmentsaves labor Works on these and many…
OTC Tools & Equipment 6992 Injector Sleeve Service Set
Set includes tools to remove fuel injector sleeves, clean the injector bore and fuel galley, and install injector sleeve cups. With the head removed, the slide hammer adapter can be installed to pull the injector sleeve. The brush set properly cleans…
OTC Tools & Equipment 7071 Differential Housing Spreader
Helps in removing and installing the differential ring gear assembly from the carrier on Dana axle models 30 through 70.
OTC Tools & Equipment 7929A Steering Wheel Puller Leg Kit
Steering Wheel Puller Leg Set Particularly useful during steering wheel removal when there are no tapped holes in the assembly. The 7929A is designed for use with either the No. 7245 or No. 7403 OTC steering wheel puller. These legs get behind the…
OTC Tools & Equipment 8030 External-Internal Threaded Adapter
External-Internal Threaded Adapter
For use on the ends of Push-Puller legs or forcing
screws when pulling shafts, bearing caps, pinions, etc.
No. 8030
Internal End 3/4"16
External End 5/8"18
Length 2-1/4"
For use on the ends of Push-Puller legs or forcing
screws when pulling shafts, bearing caps, pinions, etc.
No. 8030
Internal End 3/4"16
External End 5/8"18
Length 2-1/4"
OTC Tools & Equipment 8034 Chrysler Ball Joint Socket
Chrysler Ball Joint Socket Removes and installs the screw-in type ball joints used on Chrysler / Dodge light trucks and vans. Similar to Miller Tools No. C-3561. Socket is 2" long with a 3/4" drive; fits 2-9/64" ball joints. No. 8034 Chrysler bal…
OTC Tools & Equipment 8056 Internal Threaded Adapter set
Shaft Protector Set Designed to protect shaft centers from distortion when extreme pressures are applied with either Grip-O-Matic pullers or Push-Pullers. 8056 Set 8050 OD. 1-1/2" height 3/4" Internal point 3/8" External point 7/16" 80…
Lisle 57650 Alternator Decoupler Pulley Tool Kit
The alternator decoupler pulley tool kit includes all of the tools required for removal and installation of ADP (one way and overriding/freewheeling) This handy tool kit includes five tools designed for North American vehicles