Lowest Prices
up to 60% off
Same Day Shipping
on most orders
30 Day Money
Back Guarantee

Result Pages:
OTC
OTC 43661

OTC Tools & Equipment 43661 Grip-O-Matic 2-Jaw Reversible Gear Puller

OTC
Forged from top quality steel and heat treated for superior performance. Ideal for use on outside and inside pulling jobs.4-1/16 Jaw (1 only) For 1022
On Sale:

$20.23

Avail:
5 in Stock
Warehouse: US-2
Qty:
OTC
OTC 4531

OTC Tools & Equipment 4531 Harmonic Balancer Puller/Installer Set

OTC
Harmonic Balancer Puller/Installer Set For easy removal of most harmonic balancers and drive pulleys which are press-fitted onto the crankshaft. A bearing-centered circular 2/3-way puller flange and an assortment of metric and fractional bolts and a
On Sale:

$112.68

Avail:
8 in Stock
Warehouse: US-10
Qty:
OTC
OTC 4731A

OTC Tools & Equipment 4731A Honda/Acura Damper Holding Tool

OTC
Holds damper for removal and installation of the crank bolt on most Honda/Acura engines. Can remove and install the damper so engine will not rotate. 4" offset. 1/2" square drive can be used with ratchet or breaker bar. 50mm hex with large ce
On Sale:

$42.79

Avail:
13 in Stock
Warehouse: US-10
Qty:
OTC
OTC 4732

OTC Tools & Equipment 4732 Honda/Acura Crankshaft and Harmonic Balancer Holder

OTC
Allows the crankshaft pulley and/or harmonic balancer bolt to be broken loose.
Includes tool necessary to properly counter the rotation of the crankshaft pulley/harmonic balancer during removal and reinstallation of crank bolt.
Secures th
On Sale:

$138.53

Avail:
5 in Stock
Warehouse: US-10
Qty:
OTC
OTC 5887

OTC Tools & Equipment 5887 Crankshaft Seal And Wear Sleeve Installer

OTC
This tool installs the front and rear crankshaft wear sleeves and seals. It eliminates lip flare on the wear sleeve and installs the seal properly. For use on Detroit Diesel Series 60 and two cycle 92 engines. Similar to J-35686-B. For use on Detroi
On Sale:

$342.30

Avail:
2 in Stock
Warehouse: US-2
Qty:
OTC
OTC 6667

OTC Tools & Equipment 6667 Harmonic Balancer Puller

OTC
Designed for removing damper pulleys in tight engine compartments, without removing the radiator. Use on the following: GM 2000 Generation III 4.8L, 5.3L, 5.7L 6.0L, and 8.1L V8s. Also works on Cadillac 4.5, 4.6, and 4.9L V8s beginning in 1988. Ch
On Sale:

$68.76

Avail:
11 in Stock
Warehouse: US-10
Qty:
OTC
OTC 6669
On Sale:

$114.36

Avail:
18 in Stock
Warehouse: US-2
Qty:
OTC
OTC 6881

OTC Tools & Equipment 6881 Crank Sensor Alignment Tool

OTC
Aligns the crankshaft position sensor properly during installation. Similar to 303-1521. Applications include: 2012-Later 2.0L Duratec, EcoBoost and GTDI 2015-Later 2.3L EcoBoost Applications include: 2012-Later 2.0L Duratec, EcoBoost, and GTDI.
On Sale:

$55.09

Avail:
1 in Stock
Warehouse: US-2
Qty:
OTC
OTC 6887

OTC Tools & Equipment 6887 Crankshaft Front Seal And Wear Ring Installer

OTC
The OTC 6887 Crankshaft Front Seal and Wear Ring Installer installs the front seal and wear ring on crankshaft. It's designed to eliminate lip flare on the wear sleeve and installs the seal properly. Use OE part number 303-1158 for 4.5L installation.
On Sale:

$157.66

Avail:
6 in Stock
Warehouse: US-2
Qty:
Lisle
Lisle 45500

Lisle 45500 Harmonic Balancer Puller

Lisle
Designed to ease the operation of pulling the balancer pulley. It reduces damage to both the pulley and the shaft. Includes: (3) M8x1.25x80 bolts, (2) 3/*-16x3" bolts, (3) 5/16"-18x3" bolts, (3) M10x1.5x75 bolts, (3) 3/8"-24x3" bolts, puller body, pu
On Sale:

$20.25

Avail:
32 in Stock
Warehouse: US-17
Qty:
Lisle
Lisle 50000

Lisle 50000 Mini-Cutter for Metal Tubing

Lisle
Easy-to-use mini-cutter features all nylon construction with a tough hardened blade, giving you smoother, easier operation and longer tool life. Can be used in tight spaces right on the car. For all types of metal tubing. Handles the smallest tubing
On Sale:

$5.83

Avail:
28 in Stock
Warehouse: US-17
Qty:
Lisle
Lisle 51450

Lisle 51450 Harmonic Damper Pulley Puller

Lisle
For Chrysler, GM, Mitsubishi and Dodge. Low profile design works in confined spaces eliminating the need to remove the radiator. Equipped with magnetic jaw spacers for 5.9 liter Dodge. New jaw geometry, slimmer magnetic spacers and a fourth rod
On Sale:

$67.86

Avail:
6 in Stock
Warehouse: US-17
Qty:
Lisle
Lisle 54810

Lisle 54810 Master Harmonic Balancer Puller Set

Lisle
Removes Most Automotive Harmonic Balancers The kit includes a standard harmonic balancer puller, pulling screws, adapters for 3300 and 3800 GM V6 engines, and a Harmonic Damper Pulley Puller for Chrysler, GM, Mitsubishi, & Dodge. Includes new inte
On Sale:

$149.70

Avail:
7 in Stock
Warehouse: US-17
Qty:
Lisle
Lisle 54860
On Sale:

$20.25

Avail:
1 in Stock
Warehouse: US-17
Qty:
Lisle

Lisle 54890 12PC CRESCENT SHAPE WASHER

12 Pc. Crescent Shape Washer
On Sale:

$2.33

Avail:
1 in Stock
Warehouse: US-7
Qty:
Lisle
Lisle 77060

Lisle 77060 17mm Harmonic Balancer Socket

Lisle
This heavy-duty impact socket is designed with more than two times the standard socket mass to direct more energy to removing the bolt Can be used on Honda engines and other engines that use a 17mm hex pulley damper bolt or other 17mm applications
On Sale:

$19.67

Avail:
1 in Stock
Warehouse: US-17
Qty:
Lisle
Lisle 77110

Lisle 77110 22mm Harmonic Balancer Socket

Lisle
Heavy-duty impact sockets designed with more than three times the standard socket mass to direct more energy to removing the bolt Can be used on BMW, Dodge, Ford, Jeep, Kia, Lexus, and Toyota Engines that use a 22mm hex pulley damper bolt or other 2
On Sale:

$30.04

Avail:
1 in Stock
Warehouse: US-2
Qty:
Astro Pneumatic
Astro Pneumatic 7846

Astro Pneumatic 7846 Harmonic Balancer Puller Set

Astro Pneumatic
Designed for use on harmonic balancers, crankshaft pulleys, steering wheels and gear pulleys Can be used on tapped flywheels of electric or two-cycle motors Heavy duty 4-way slotted yoke 3 - Hardened forcing screws 3-3/4 & 6-1/2 long 11 sets of w
On Sale:

$49.40

Avail:
18 in Stock
Warehouse: US-2
Qty:
KD Tools
KD Tools 2286D

GearWrench 2286D 12 Pc. Harmonic Balancer Puller

KD Tools
Puller removes balancers, pulleys, and gears with tapped holes Floating swivel prevents damage to the shaft end Four slots in the yoke allow for 2 or 3 hole applications Tool bolts to balancer with center screw on the end of the crankshaft Tighte
On Sale:

$28.89

Avail:
4 in Stock
Warehouse: US-2
Qty:
KD Tools
KD Tools 36790

GearWrench 36790 Harmonic Balancer Installer

KD Tools
Installs Drive Pulleys on Harmonic Balancers Complete range of adapters Comes with thrust bearing for ease of use
On Sale:

$82.44

Avail:
1 in Stock
Warehouse: US-2
Qty:
KD Tools
KD Tools 41600

GearWrench 41600 Master Bolt Grip Kit - Multi-Use Puller Kit

KD Tools
Master Bolt Grip Kit works on harmonic balancers, steering wheels, crankshaft pulleys, and gears. Capable of handling almost every two or three-way bolt pull possible on most cars, pickups, SUVs, and small engines.
Kit Contents:
Two or th
On Sale:

$73.32

Avail:
4 in Stock
Warehouse: US-2
Qty:
Cal-Van Tools

Cal-Van Tools 38110 Ford Harmonic Balancer Holder

A quick and easy way to prohibit the crankshaft from turning when needing to either loosen or tighten the balancer bolt on many Ford, Lincoln, Mazda and other vehicles, or it can be used to turn the engine when doing timing work.
On Sale:

$33.43

Avail:
12 in Stock
Warehouse: US-2
Qty:
OTC
OTC 440656
Avail:
0 in Stock
Warehouse: US-1
OTC
OTC 44148

OTC Tools & Equipment 44148 Slide Hammer Puller - Long Jaw

OTC

Contains number 1176 reversible jaw slide hammer puller, plus an assortment of special jaws and adapters. You get all the versatility of the number 1176 puller plus attachments for pulling various sizes of pilot bearings, oil seals, bushings, t
Avail:
0 in Stock
Warehouse: US-10
OTC
Avail:
0 in Stock
Warehouse: US-10
Result Pages: