Wire Wheels & Brushes
Displaying 1 to 25 (of 45 products)
Lisle 14060 1" Crimped Wire End Brush
For Light to Heavy Duty Work When Space is Limited. Made with .020" industrial heat tempered wire. Use with portable electric and air tools. 20,000 RPM maximum safe free speed. Crimped end brush for light to heavy work. Cleans dirt and carbon from me…
Astro Pneumatic 9022 3 pc. Flexible Honing Brush Set
Set includes following sizes: 1/2", 3/4" and 7/8" Flexible filaments with silicon carbide material are engineered to provide the correct pressure to create an ideal hone Great polishing tool which provides excellent result when used for deburring …
GearWrench 2309 Stainless Steel Brush
Brush has hand-tied stainless steel tufts for cleaning corrosion from parts without scratching. Brush size: 3/8 x 1-3/8_. Handle length: 7_.
GearWrench 2310 Curved Handle Wire Scratch Brush
Clean carbon, dirt and paint from metal and other surfaces with this wooden-handle brush Overall length: approximately 14 Bristle area: 3 x 19 rows, 1-1/8 time and 6 long
GearWrench 2311 Shoe Handle Wire Scratch Brush
Use this hardwood-handle brush to clean dirt, carbon and rust frommetal and other surfaces. Bristles are densely packed over 5-1/4_.Overall length: approximately 10_. Bristle area: 4 x 16 rows and1-1/8_ trim.
GearWrench 2312 1" Knot-type Wire-End Brush
Brush removes rust, carbon and paint from metal and other surfaces It is designed for heavy-duty use and consists of industrial tempered straight twisted wire 0.020" Use with electric drills, pneumatic tools or flexible shaft equipment Face diamet…
GearWrench 2313 1" Crimped Wire-End Brush
Brush removes dirt, rust and paint from metal and other surfaces. It is designed for general-purpose cleaning with 0.020" industrial crimped wire. Use in electrical drills, pneumatic tools or flexible shaft equipment. Face diameter: 1". Shank diamete…
GearWrench 2314 2-1/2" Wire Cup Brush
Brush removes light scale, rust and paint from surfaces It is designed for light-duty use with 0.014 high carbon steel wire Use in electric drills or flexible shaft equipment Face diameter: 2-1/2 Shank diameter: Maximum safe free speed: 5000…
GearWrench 710 Nut Cracker
Splits most stubborn nuts 7/16_ (11mm) through 3/4_ (19mm) across the flats. Ideal for work on shocks, mufflers and tailpipes. Consists of a hardened steel chisel driven by a large steel screw. Simply tighten the screw until the nut splits. Do not us…
S & G Tool Aid 17120 End Brush, Hollow End Knot
Use in severe applications to remove deep rust, weld splatter, scale and heavy carbon deposits. Made of crimped steel wire. Made with 0.020" high fatigue resistant steel wire. 1/4"Shank fits all portable drills. For best brushing results do not o…
ATD Tools 8228 2-3/4 Knot Cup Brush
Use this rugged brush for fast cleaning of large surface areas. This style is especially suited for pipe bevel cleaning. 2-3/4 diameter .020 wire size arbor 5/8-11
ATD Tools 8229 3 Crimped Cup Brush
For efficient cleaning of large surface areas. Long-lasting wire brushes give great flexibility in a wide variety of heavy-duty applications such as edge blending and removal of surface film, rust, scale or paint. 3 diameter, .014 wire size, Arbor 5…
ATD Tools 8234 3 Crimped Wire Cup Brush
For light to medium duty cleaning of large surface areas. Long-lasting wire brushes give great flexibility in a wide variety of heavy-duty applications such as edge blending and removal of surface film, rust, scale or paint. 3 diameter crimped wire…
ATD Tools 8245 2 Encapsulated Wire Wheel
2 Diameter, .014 Wire Size, 1/2 Arbor. Wire brush bonded in a synthetic material. Wire tips are firmly supported producing a very aggressive brushing action to assure a safe, well-balanced brush that will outlast most conventional brushes. Uses for t…
ATD Tools 8252 6" Standard Twist Wheel
Rugged knot-type construction provides aggressive, high-impact action for severe applications Wire Size: .014 Trim Length: 1-3/8" Arbor Hole: 5/8"-1/2" No. of Knots: 24 Face Width: 1/2" Thickness at Face Plate: 9/16" Max RPM: 9,000
ATD Tools 8253 1" Crimped Wire End Brush
Solid End For light duty, general purpose applications Wire Size: .020 Trim Length: 1-1/8" Max RPM: 22,000
ATD Tools 8255 1-1/2" Circular Flared End Brush
Accommodates the natural working angle; for broad range of surfaces and contours Wire Size: .020 Max RPM: 20,000
ATD Tools 8256 10 Scratch Brush
4 x 16 wire/row; 10" length; short, wood handle. For heavy-duty cleaning of metal and masonry surfaces.
ATD Tools 8257 14 Scratch Brush
3 x 19 wire/row; 14" length; long, wood handle. For heavy-duty cleaning of metal and masonry surfaces.
ATD Tools 8261 8" Crimped Wire Wheel
Provide a flexible brushing action and consistent performance for demanding light-duty cleaning and deburring applications Wire Size: .014 Trim Length: 2-1/16" Arbor Hole: 3/4" Max RPM: 6,000
Brush Research CE314 Encap. Brush Wheel, 3" Diam., 5/8" Arbor Holes
3" diameter .014 wire size 5/8 Arbor holes 3/8 approx.. running face width Max safe free speed (RPM) of 20,000 CE 3 .014 5/8 AH ENCAPSULATED WHLBRM CE314 ENCAPSULATED WHEEL BRUSH, 3" DIAMETER, 5/8" ARBOR HOLE, 1" TRIM LENGTH, .312" FACE WIDTH, .0…
Displaying 1 to 25 (of 45 products)