Lowest Prices
up to 60% off
Same Day Shipping
on most orders
30 Day Money
Back Guarantee
Punch & Chisel Sets
Filter by Brand:
OTC Tools & Equipment 4383 Hole Punch Kit
Easy, smooth operation. Will pierce up to 14 gauge steel 7 sets punches and dies. Sizes: 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", and 9/32"
OTC Tools & Equipment 4602 Stinger Brass Punch Set - 2 pc.
Brass Punch Set (2 piece) Two large, brass non-sparking punches. Ideal for use near precision parts or in locations where sparks from ferrous metal could be hazardous. Includes an 8" punch (5/8" hex, tapered to 3/8") and 10" straight punch (3/4" di…
OTC Tools & Equipment 4605 12 pc. Stinger Quick Change Punch & Chisel Set
Safety protective handle for easy grip & protect hands from being hit. 12 punches and chisels included: 5 flat chisels: 1/2, 5/8, 3/4, 7/8, 1 wide blades, 1 cape chisel: 1/4 wide blade, 2 taper punches: 1/8 & 1/4 diameter, 2 pin punches: 3/16 and 1/…
OTC Tools & Equipment 4606 Brass Hammer and Punch Set
Brass Hammer and Punch Set Brass-head hammer and punches are ideal to use where sparks from ferrous metals would be hazardous, or where precision metal parts could be damaged by steel tools. Hammer head weighs 24 oz.; brass drift punch is 10" x 3/4…
ATD Tools 759 Long Taper Punch, 3 pc.
Hot forged quality steel Polished to a smooth finish Tempered for strength Set Contains: 3/16, 1/4 and 5/16 long taper drift punches Packed in a vinyl roll
ATD Tools 760 Chisel-Punch Set, 8 pc.
High quality master set. Hot forged quality steel. Polished to a smooth finish. Tempered for strength. Set Contains: 1/8, 3/16 and 1/4 pin punches 1/4 solid punch 3/8 center punch 1/2, 5/8 and 3/4 cold chisels Packed in vinyl roll
Lisle 30950 CV Joint Banding Tool
For All Band-It and Band-It Jr. Style Clamps. Works on all CV joints using the Band-It or Band-It Jr. type boot bands. Use 5/8" socket or wrench to wind and crimp new band on boot. Tool is easily disengaged from the band after the band is tightened.
Astro Pneumatic 1600 16 Pc. Punch and Chisel Set
Product material: CR-V and hardness: 54~58HRC Includes: Taper Punch: 3/32-inch x 5-1/4-inch, 1/8-inch x 5-3/4-inch, 5/32-inch x 6-inch, 3/16-inch x 6-1/4-inch, 1/4-inch x 6-3/4-inch Cold Chisels: 3/8-inch by 5-1/2-inch, 1/2-inch by 6-inch, 5/8-inc…
GearWrench 82304 5 pc. Punch Chisel Set
Softened striking surface Surface ground for easy identification Precision hardened alloy steel Hardened tips Set includes the following: 3/8" x 5" Center Punch (KDT-82270) 1/8" x 5/16" Pin Punch (KDT-82273) 5/32" x 5-1/4" x 5/16" Pin Punch (K…
GearWrench 82305 12 pc. Punch and Chisel Set
Set includes: KDT-82261, KDT-82262, KDT-82264, KDT-82265, KDT-82270, KDT-82272, KDT-82273, KDT-82274, KDT-82275, KDT-82278, KDT-82283 & KDT-82285 in a tool roll.
GearWrench 82306 27 pc. Punch and Chisel Set
Set includes: KDT-82261, KDT-82262, KDT-82263, KDT-82264, KDT-82265, KDT-82266, KDT-82267, KDT-82268, KDT-82269, KDT-82270, KDT-82281, KDT-82272, KDT-82273, KDT-82274, KDT-82275, KDT-82276, KDT-82277, KDT-82278, KDT-82279, KDT-82280, KDT-82281, KDT-8…
GearWrench 82308 4 Pc. Cold Chisel Set
7/16" x 5-1/2" x 3/8" Cold Chisel (KDT- 82263)
1/2" x 6" x 3/8" Cold Chisel (KDT- 82264)
5/8" x 6-1/2" x 1/2" Cold Chisel (KDT- 82265)
3/4" x 7" x 5/8" Cold Chisel (KDT-82266)
Vinyl Pouch
1/2" x 6" x 3/8" Cold Chisel (KDT- 82264)
5/8" x 6-1/2" x 1/2" Cold Chisel (KDT- 82265)
3/4" x 7" x 5/8" Cold Chisel (KDT-82266)
Vinyl Pouch
Grey Pneumatic CS106 6 Pc. .401 Shank Exhaust Service Chisel Set
This set contains the most popular .401 shank chisels for exhaust and muffler service Includes: 3/4" Flat Chisel 7" Long (CH102) Tailpipe Cutter 7" Long (CH119) Muffler Cutter 7" Long (CH120) Muffler & Pipe Cutter 7-1/2" Long (CH121) Outside Mu…
Grey Pneumatic CS110 10 Pc. .401 Shank General Service Chisel Set
This set contains the most popular .401 shank chisels to handle a wide variety of job types Comes with a Molded Storage Tray Set includes: 3/4" x 7 Flat Chisel (CH102) 7 Claw Ripper & Panel Cutter (CH110) 7 Tapered Punch (CH111) 7 Straight Punc…
Grey Pneumatic CS807 7 Pc. .498 Shank H.D. Chisel Set
This set contains the most popular .498 shank chisels for heavy duty service work Includes: 5/8" Flat Chisel 7" Long (CH801) Tapered Punch 7" Long (CH811) Straight Punch 7" Long (CH813) Dual Blade Panel Cutter 7" Long (CH815) Rivet Cutter 6-1/2…
Mayhew Tools 10601 3/16? PRO Diamond Point Chisel
Diamond point chisels are used to make a V- shaped groove in metal, where the bottom of the cut comes to a sharp point. Alternate sizes are available for cutting the proper size of groove. This product is finished with a black oxide for rust protecti…
Mayhew Tools 17354 Mayhew Hammerless - Center Punch & Prick Punch
Hammerless Center Punch and Prick Punch 3/16"-5/32"
Mayhew Tools 22013 458-5/16 REG LINE-UP PUNCH
Features and Benefits: Ideal for aligning holes in metal pieces through which rivets, pins or bolts are inserted Full finish Made in the USA This punch is shaped like a thin rod, used to make sure holes line up when assembling two or more compo…
Mayhew Tools 25009 112-3/8 #10 Pilot Punch
Used to drive in and remove roll pins or other hollow tension pins. Original Mayhew patented design with a rounded end that fits snugly within a roll pin. Made in the USA Used to drive in and remove roll pins or other hollow tension pins
Mayhew Tools 25075 100-3/4 Brass Drift Punch KNRLD
Features and Benefits: For non-marring and non-sparking applications. Designed for use on harder surface materials that will not be damaged by the softer brass punches. For aligning unhardened steel or aluminum.
Mayhew Tools 32022 Mayhew„&Cent; Pneumatic Tapered Punch Set 5-Piece
Features & Benefits: Standard .401 Turn Type Parker Shanks for air gunsBlack oxide finish to prevent corrosion Fully hardened and tempered shock resistant tool steel Made in the USA Lifetime warranty
Mayhew Tools 32023 Mayhew„&Cent; 5-Piece Pneumatic Cut Chisel Scrape Set
Product Details Features & Benefits: Includes 31960 Spot weld breaker, 31970 2 x 8 1/2 scraper, 31972 5/8 cold chisel, 31975 rivet/bolt cutter, 31976 1 1/8 x 8 scraper For use with pneumatic air gun .401 shank Black oxide finish Fully hardene…
Mayhew Tools 32025 4 Pc. Hammer Set
Standard .401 Turn Type Parker Shanks for air guns Fully hardened and tempered shock resistant tool steel Black oxide finish to prevent corrosion Made 100% in the USA Lifetime Warranty