Displaying 1 to 12 (of 12 products)
30 and 80 Offset Push Pin Pliers Set includes: Push Pin Removal Pliers - 30 Push Pin Pliers - 80
Brand: | KD Tools |
Part #: |
41840 |
UPC: |
082171418402 |
Weight: |
0.8 lbs |
Condition: | New |
VIM push pin pliers are designed to remove plastic push pins on Honda, Toyota, GM, Saturn and many other vehicles Special ground tips remove the pins without damage V230 pliers can also be used to remove U-joint circle clips V231 has a 75 degree o…
Brand: | Vim |
Part #: |
V2300 |
UPC: |
092308230319 |
Weight: |
1.1 lbs |
Condition: | New |
Needle nose pliers design fits into recessed pin locations found on some GM vehicles. Designed to prevent damage to the pin or anchor. Also works on traditional clips. Integrated spring makes tool easier to use. Built-in cutter allows technic…
Brand: | Lisle |
Part #: |
42810 |
UPC: |
083045428107 |
Weight: |
0.42 lbs |
Condition: | New |
For Push Pin plastic anchors with center pins common on Honda, Toyota, GM, Ford, Chrysler and other late model vehicles Allows the Push Pin fastener to be reinstalled.
Brand: | KD Tools |
Part #: |
3729 |
UPC: |
082171037290 |
Weight: |
0.45 lbs |
Condition: | New |
New 80 offset used for tight wheel well access Used on all late model Japanese and US vehicles
Brand: | KD Tools |
Part #: |
3888 |
UPC: |
08217103888042 |
Weight: |
2 lbs |
Condition: | New |
Specially designed for removal of push pins With center locking pin Quickly removes plastic anchors that have center pins without damage to pins or anchor Lifts the center pin and pulls anchor in one simple step Anchors common on Honda, Toyota, GM…
Brand: | KD Tools |
Part #: |
3888D |
UPC: |
08217103888042 |
Weight: |
2 lbs |
Condition: | New |
The harden steel tapered end of the Right Angle Sure Grip Trim Clip Plier allows the tip to grab the stem of the trim clip The right angle provides the access to reach tight areas to lever out the trim clips without breaking them Textured handle al…
75 Degree Offset Push Pin Removal Pliers
Brand: | Vim |
Part #: |
V231 |
UPC: |
092308002312 |
Weight: |
0.54 lbs |
Condition: | New |
Brand: | Cal-Van Tools |
Part #: |
952-200 |
Weight: |
0.75 lbs |
Condition: | New |
1/4" Collet for 952 Puller
Brand: | Cal-Van Tools |
Part #: |
952-210 |
UPC: |
047084952214 |
Weight: |
0.25 lbs |
Condition: | New |
Brand: | Cal-Van Tools |
Part #: |
953-240 |
UPC: |
047084953242 |
Weight: |
1 lbs |
Condition: | New |
New Dowel Pin Puller that extracts Dowels without the use of a slide hammer. Fit the appropriate sized collet over the dowel, tighten the sleeve, Use outer sleeve and nut to extract the dowel. Can be used with air ratchet, or traditional ratchet. E…
Brand: | Cal-Van Tools |
Part #: |
95400 |
UPC: |
047084954003 |
Weight: |
4.65 lbs |
Condition: | New |
Displaying 1 to 12 (of 12 products)