Displaying 1 to 25 (of 182 products)
Mini Pick and Hook Set 4-Piece Sturdy stainless steel points and shafts designed for marking, removing o-rings, accessing snap rings, and performing other tasks. Assorted angle tips allow you to reach awkward locations. Knurled shaft design enhanc…
Brand: | OTC |
Part #: |
4515 |
UPC: |
0731413039393 |
Weight: |
10 lbs |
Condition: | New |
O-Ring / Oil Seal Pick Set Fishing a stubborn o-ring or oil seal out of its seat is easy if you have this pair of picks in your toolbox. No. 7103 O-ring/oil seal pick set.
Brand: | OTC |
Part #: |
7103 |
UPC: |
0731413000744 |
Weight: |
10 lbs |
Condition: | New |
O-Ring / Oil Seal Pick Heres an extremely handy tool that makes quick work of oil seal and o-ring removal and installation. No. 7312 O-ring/oil seal pick.
Brand: | OTC |
Part #: |
7312 |
UPC: |
0731413001048 |
Weight: |
0.1 lbs |
Condition: | New |
Works Great for Removing Hoses, Moldings, Clips, Clamps, Seals, O-Rings, Cotter Pins, and Gaskets. Includes hook pick, straight pick, 90 pick and combination pick. Small enough for maximum versatility in tight and hard to reach places. Dual mate…
Brand: | Lisle |
Part #: |
31750 |
UPC: |
083045317500 |
Weight: |
0.3 lbs |
Condition: | New |
Two tip configurations and two blade lengths to work on most applications including oil pump drive shaft seals, injectors and fuel rail O-rings. Also removes inner tie rod rack boot, CV boot, heater and vacuum hoses. Dual material grip handle for co…
Brand: | Lisle |
Part #: |
31920 |
UPC: |
083045319207 |
Weight: |
0.24 lbs |
Condition: | New |
Contains long and short, standard and offset hooks. Can be used to remove hoses, moldings, clips, clamps, seals, o-rings, cotter pins, gaskets, etc. Long pullers are 13" long. Handles are dual material for comfort and grip. Rods are heat-treated for …
Brand: | Lisle |
Part #: |
80380 |
UPC: |
083045803805 |
Weight: |
1.63 lbs |
Condition: | New |
Wider blades reduce the chance of damage when removing. The long blade is used for pulling the hose off, while the short blade is designed for pushing. Handles are dual material for comfort and grip.
Brand: | Lisle |
Part #: |
82130 |
UPC: |
083045821304 |
Weight: |
0.6 lbs |
Condition: | New |
Easy removal of seals and O-rings without damaging the seal or the surrounding surfaces Set includes 2 contoured tips and 2 spoon tips Made from solid CR-V
Brand: | Astro Pneumatic |
Part #: |
9540 |
UPC: |
745227026746 |
Weight: |
1 lbs |
Condition: | New |
Use to remove body clips, mouldings, windshield seals. Doubles as a cotter pin extractor. Use as a spring puller. Saves radiator hoses.
Brand: | S&G Tool Aid |
Part #: |
13700 |
UPC: |
638570137002 |
Weight: |
0.24 lbs |
Condition: | New |
Hooker tools are great for removal of radiator hoses from inlets, outlets and clamps Excellent for cotter pin removal Use on body clips, moldings and windshield seals Retrieve small parts Remove "O" rings and washers Hook is made of tough spring…
Brand: | S&G Tool Aid |
Part #: |
13800 |
UPC: |
638570138009 |
Weight: |
0.26 lbs |
Condition: | New |
Hooker tools are great for removal of radiator hoses from inlets, outlets and clamps. Excellent for cotter pin removal. Use on body clips, moldings and windsheild seals. Retrieve small parts. Remove "O" rings and washers. Hook is made of tough spring…
Brand: | S&G Tool Aid |
Part #: |
13810 |
UPC: |
638570138108 |
Weight: |
0.5 lbs |
Condition: | New |
Hooker tools are great for removal of radiator hoses from inlets, outlets and clamps. Excellent for cotter pin removal. Use on body clips, moldings and windsheild seals. Retrieve small parts. Remove "O" rings and washers. Hook is made of tough spring…
Brand: | S&G Tool Aid |
Part #: |
13820 |
UPC: |
638570138207 |
Weight: |
0.72 lbs |
Condition: | New |
Four piece set of handy technicians tool with many applications. Ideal for installing and removing O rings, seals and washers; pulling small fuses; retrieving small parts; aligning; scribing; piercing and more. Stainless steel blades have knurled a…
Brand: | S&G Tool Aid |
Part #: |
13900 |
UPC: |
638570139006 |
Weight: |
0.24 lbs |
Condition: | New |
Sharp, tempered point scribes metal. Hooked end removes O-rings, seals and gaskets. It has a 90 hook. Length: 8
Brand: | KD Tools |
Part #: |
2979 |
UPC: |
082171029790 |
Weight: |
1 lbs |
Condition: | New |
3-1/2" aluminum handle Includes the following heat-treated, high carbon steel picks: o-ring, 90, straight and hook Use to pull o-rings, seals, cotter pins and brushes quickly and easily Magnetic handle retrieves small ferrous metal parts easily I…
Brand: | KD Tools |
Part #: |
3121DP |
Weight: |
1.2 lbs |
Condition: | New |
Ergonomic tri-lobe dual material handle provides the optimal balance of strength and efficiency
Brand: | KD Tools |
Part #: |
84001H |
UPC: |
099575040016 |
Weight: |
0.18 lbs |
Condition: | New |
8" overall length for reach Use for removing springs clamps or other prying Blades are securely fixed in the handle so they do not twist during use Ergonomic tri-lobe dual material handle provides the optimal balance of strength and efficiency Oi…
Brand: | KD Tools |
Part #: |
84002D |
UPC: |
099575840029 |
Weight: |
0.47 lbs |
Condition: | New |
Ergonomic tri-lobe dual material handle provides the optimal balance of strength and efficiency
Brand: | KD Tools |
Part #: |
84002H |
UPC: |
099575040023 |
Weight: |
0.23 lbs |
Condition: | New |
Ergonomic tri-lobe dual material handle provides the optimal balance of strength and efficiency
Brand: | KD Tools |
Part #: |
84003H |
UPC: |
099575040030 |
Weight: |
0.21 lbs |
Condition: | New |
Ergonomic tri-lobe dual material handle provides the optimal balance of strength and efficiency
Brand: | KD Tools |
Part #: |
84004H |
UPC: |
099575040047 |
Weight: |
0.07 lbs |
Condition: | New |
Ergonomic tri-lobe dual material handle provides the optimal balance of strength and efficiency
Brand: | KD Tools |
Part #: |
84006H |
UPC: |
099575008405 |
Weight: |
0.1 lbs |
Condition: | New |
Ergonomic tri-lobe dual material handle provides the optimal balance of strength and efficiency
Brand: | KD Tools |
Part #: |
84007H |
UPC: |
099575008474 |
Weight: |
0.08 lbs |
Condition: | New |
Ergonomic tri-lobe dual material handle provides the optimal balance of strength and efficiency
Brand: | KD Tools |
Part #: |
84010H |
UPC: |
099575084010 |
Weight: |
1.01 lbs |
Condition: | New |
Ergonomic tri-lobe dual material handle provides the optimal balance of strength and efficiency
Brand: | KD Tools |
Part #: |
84011H |
UPC: |
099575008412 |
Weight: |
0.09 lbs |
Condition: | New |
Ergonomic tri-lobe dual material handle provides the optimal balance of strength and efficiency
Brand: | KD Tools |
Part #: |
84012H |
UPC: |
099575008467 |
Weight: |
0.1 lbs |
Condition: | New |
Displaying 1 to 25 (of 182 products)