Displaying 1 to 25 (of 32 products)
Disconnects Ford Hydraulic Clutch Lines. Easily disengages the hydraulic clutch line from the clutch slave cylinder on some Ford manual transmissions. Tool prongs fit around clutch line above nylon sleeve. For 1989 and newer Mercury Cougars and Thund…
Brand: | Lisle |
Part #: |
11750 |
UPC: |
083045117506 |
Weight: |
2 lbs |
Condition: | New |
Brand: | Lisle |
Part #: |
22120 |
UPC: |
083045221203 |
Weight: |
2.47 lbs |
Condition: | New |
Hold or Turn Flywheels and Flexplates on Most Vehicles. Use this special wrench to turn the flywheel and rotate the engine. Also holds the flywheel or flexplate when torqueing the flywheel or harmonic balancer bolts. Folds for easy storage.
Brand: | Lisle |
Part #: |
23800 |
UPC: |
083045238003 |
Weight: |
1.38 lbs |
Condition: | New |
Forcing Screw for OT7249
Brand: | OTC |
Part #: |
222395 |
UPC: |
731413113802 |
Weight: |
10 lbs |
Condition: | New |
Clutch Alignment Tool Set (17 piece) Essential for clutch installation on virtually all cars and light-duty trucks. Aligns clutch plate by using tapered cones and pilot adapters. Includes seven fractional pilot adapters, one clutch disc centering a…
Brand: | OTC |
Part #: |
4528 |
UPC: |
0731413039485 |
Weight: |
10 lbs |
Condition: | New |
For installation of heavy duty clutch components. Insert the tool into the flywheel pilot bearing and slide discs, center plate and clutch cover over the spline to position them prior to bolt up. For use on heavy duty single, two plate, push-pull, se…
Brand: | OTC |
Part #: |
5030 |
UPC: |
0731413009662 |
Weight: |
1.1 lbs |
Condition: | New |
The gauges in this set enable you to check the adjustment of pull-type, heavy-duty clutches, ensuring their correct operation. One gauge checks the amount of free play between the yoke and the bearings wear pad. The other gauge lets you determine the…
Brand: | OTC |
Part #: |
5035 |
UPC: |
0731413009693 |
Weight: |
3.4 lbs |
Condition: | New |
Replaces self-adjuster mechanism on Spicer self-adjust clutches.
Brand: | OTC |
Part #: |
5044 |
UPC: |
0731413004421 |
Weight: |
0.4 lbs |
Condition: | New |
Here is a socket that makes life a little easier for anyone who works on Mack trucks. Designed for 1/2" square drive ratchet or breaker bar, the socket fits the slotted adjusting screw in tapered kingpins used on most Mack front axles (12,000 to 20,0…
Brand: | OTC |
Part #: |
5053 |
UPC: |
0731413021992 |
Weight: |
10 lbs |
Condition: | New |
Part of set No. 6508 Disconnect tool set
Brand: | OTC |
Part #: |
519153 |
UPC: |
731413453250 |
Weight: |
1 lbs |
Condition: | New |
1-1/2" O.D., 1" pilot. Constructed of a lightweight fiberglass-reinforced nylon body that wont hang up in the clutch disc splines. Designed for perfect fit to the spline of the clutch disc...easily supports heavy pressure plates.
Brand: | OTC |
Part #: |
7072A |
UPC: |
0731413004476 |
Weight: |
0.6 lbs |
Condition: | New |
1-3/4" O.D., 1-1/4" pilot. Constructed of a lightweight fiberglass-reinforced nylon body that wont hang up in the clutch disc splines. Designed for perfect fit to the spline of the clutch disc...easily supports heavy pressure plates.
Brand: | OTC |
Part #: |
7073A |
UPC: |
0731413005206 |
Weight: |
0.75 lbs |
Condition: | New |
2 O.D., 1-1/4 pilot. Constructed of a lightweight fiberglass-reinforced nylon body that wont hang up in the clutch disc splines. Designed for perfect fit to the spline of the clutch disc and easily supports heavy pressure plates.
Brand: | OTC |
Part #: |
7074A |
UPC: |
0731413005213 |
Weight: |
10 lbs |
Condition: | New |
1-3/4"; O.D., 1"; Pilot Constructed of a lightweight fiberglass-reinforced nylon body that won't hang up in the clutch disc splines Designed for perfect fit to the spline of the clutch disc-easily supports heavy pressure plates
Brand: | OTC |
Part #: |
7480 |
UPC: |
0731413004674 |
Weight: |
0.8 lbs |
Condition: | New |
Hook this tool into flywheel teeth to rotate the crankshaft. Use when working on clutches, transmissions, installing rings or other jobs that require the crankshaft to be in a specific position. Spring tension aids tool engagement on the flywheel.
Brand: | KD Tools |
Part #: |
2270 |
UPC: |
082171022708 |
Weight: |
0.88 lbs |
Condition: | New |
Tool compresses automatic-transmission clutch springs on some GM,Ford, Toyota and other transmissions. It permits easy removal andinstallation of snap rings. Job can be completed without removing centershaft and clutch assembly from transmission hous…
Brand: | KD Tools |
Part #: |
2398 |
UPC: |
082171023989 |
Weight: |
3.55 lbs |
Condition: | New |
Remove and install clutches on GM air conditioning compressors. Remove clutch plate without removing retaining ring and install clutch plate with compressor on car. Use it on all A-6 and R-4 compressors. Tool will not work on metric threads.
Brand: | KD Tools |
Part #: |
2416 |
UPC: |
082171024160 |
Weight: |
0.94 lbs |
Condition: | New |
Align single disc clutches on American and imported cars, light trucks and tractors. Adapter fits through clutch plate and into pilot bushing or bearing. Tapered cone fits into clutch hole and aligns clutch plate properly. Set includes shaft and 8 tw…
Brand: | KD Tools |
Part #: |
2420 |
UPC: |
082171024207 |
Weight: |
2.08 lbs |
Condition: | New |
Used to release fingers that hold clutch line to the clutch sleeve cylinders. Works on hard-to-reach couplings found on Ford light-duty trucks, Bronco II, Ranger, Explorer, 1989 to current Thunderbird and Cougar with hydraulic clutch.
Brand: | KD Tools |
Part #: |
3413 |
UPC: |
082171034138 |
Weight: |
0.11 lbs |
Condition: | New |
No. 218174 Flywheel handling attachment for use on No. 5015 only.
Brand: | OTC |
Part #: |
218174 |
UPC: |
0731413020575 |
Weight: |
5.25 lbs |
Condition: | New |
Drive Clutch Holding Fixture features: for solid holding of drive clutch for spider removal when shimming for belt-to-sheave clearance or servicing spider bolt to bench or clamp in a vise contacts all webs for maximum support to eliminate clutch w…
Brand: | OTC |
Part #: |
4972 |
UPC: |
0731413576638 |
Weight: |
5.25 lbs |
Condition: | New |
For installation of heavy duty clutch components. Insert the tool into the flywheel pilot bearing and slide discs, center plate and clutch cover over the spline to position them prior to bolt up. For use on heavy duty single, two plate, push-pull, se…
Brand: | OTC |
Part #: |
5029 |
UPC: |
0731413009655 |
Weight: |
1.1 lbs |
Condition: | New |
Clutch Service Set Here's an ideal companion set to the No. 5015 clutch handler. Designed for Spicer heavy-duty clutches, the nine tools in this set help with a variety of jobs, from clutch installation and removal to flywheel drive-pin installation …
Brand: | OTC |
Part #: |
5043 |
UPC: |
0731413009723 |
Weight: |
16.1 lbs |
Condition: | New |
Makes for precise alignment and proper installation of the spacer plate drive pins on the pot-type 14" flywheel to ensure free action of the hub assembly.
Brand: | OTC |
Part #: |
5045 |
UPC: |
0731413009730 |
Weight: |
3.1 lbs |
Condition: | New |
Make quick work of pulling stubborn, rusted pilot bearings The puller's forcing screw expands the jaws inside the bearing and simultaneously pushes against the crankshaft
Brand: | OTC |
Part #: |
5048 |
UPC: |
0731413005657 |
Weight: |
1.3 lbs |
Condition: | New |
Displaying 1 to 25 (of 32 products)