Spark Plug Sockets
Result Pages:
Filter by Brand:
Lisle 63080 14mm Spark Plug Socket, 12 pt.
Thin Wall, 14mm, 12 pt. Socket with Swivel to Remove and Replace Spark Plugs from Narrow Tubes. Rubber insert holds the spark plug in the socket during removal and installation. Use with 3/8" square drive.
Lisle 65600 Broken Spark Plug Remover for Ford 3-Valve
This tool set removes broken spark plugs from 2004 and newer Triton 3 valve per cylinder engines, (a common problem) The set includes a unique porcelain pusher tool and a tapered left-hand thread remover for removing the broken spark plug without le…
OTC Tools & Equipment 6900 Ford F-150 Spark Plug Socket
This unique and patented design works on 2004newer Ford vehicles with 5.4L, 4.6L, 5.4L, 3-valve Triton V8 & 6.8L Triton V10 engines. Socket end is 9/16. Soft rubber insert holds and protects spark plug during removal and installation. Extension is …
SK Hand Tool 45020 3/8" Dr STD 6 Pt Socket Chrome, 5/8"
Made in the U.S.A., featuring SK's high polish SuperKrome finish, which protects the tools from the harsh working environments found in today's workplace. Provides long life and maximum corrosion resistance. All sockets feature SK's SureGrip hex desi…
GearWrench 80403 3/8" Drive 6 Point 2-1/2" Spark Plug Socket 13/16"
Off-corner loading design reduces fastener rounding Designed for use with a 3/8" square drive tool Bright, full polish chrome finish easily wipes clean and resists corrosion Meets or exceeds ASME specifications
Astro Pneumatic 94404 Magnetic Spark Plug Universal Extension Socket Set
Full magnetic ring for a more securely retained spark plug compared to other magnetic and rubber bushing style sockets Universal swivel design for increased access with minimal outside diameter sockets for tight cylinder head clearances 3/8 drive 6…
VIM Tools SPM100 SPARK PLUG SOCKET MASTER SET
3 Pcs. Extra Deep 9/16, 5/8 & 13/16 4 Pcs. Universal Joint Spark Plug Socket 14mm, 9/16, 5/8 & 13/16 4 Pcs. Standard Spark Pug Sockets 14mm, 9/16, 5/8 & 13/16 2 Pcs. Thin Wall Spark Plug Sockets 14mm & 16mm Knurled For Finger Tip Control EVA Foa…
Grey Pneumatic 1020DUP 3/8" Drive 5/8" Deep Double Swivel Spark Plug Socket
Double swivel sockets are designed to remove spark plugs in hard to reach areas and are especially useful on transverse mounted engines They can be used with a hand ratchet or impact wrench Each socket includes a replaceable rubber spark plug retai…
Grey Pneumatic 1020UP 3/8" Drive Standard Universal Swivel Spark Plug Socket
Universal swivel sockets are designed to remove spark plugs in hard to reach areas They can be used with a hand ratchet or impact wrench Each socket includes a replaceable rubber spark plug retainer Poly bag with barcode Weight: 0.4 lbs.
Grey Pneumatic 1026RI 3/8" Drive x 13/16" Spark Plug Socket Rubber Insert
13/16" Spark Plug Socket Rubber Insert
Lisle 57450 skt repl f18mm li57400-57600
Used to remove and install belts on serpentine belt systems using a spring loaded idler pulley. Will reach where conventional ratchets and breaker bars wont. Extension bars may be bolted on for hard to reach places. Includes serpentine tool, 13mm, 14…
Lisle 63070 16mm Spark Plug Socket, 12pt.
Thin Wall, 16mm, 12 pt. Socket with Swivel to Remove and Replace Spark Plugs from Narrow Tubes. Magnetic insert holds the spark plug in the socket during removal and installation. Works on some BMW, Chrysler, Dodge, Jeep, Honda, Acura, Mercedes, and…
Lisle 63100 Flexible Spark Plug Starter Kit
Used to Start and Remove Spark Plugs in Deeply Recessed Holes The 9" flexible shaft allows technicians to obtain the desired angle to accurately install most spark plugs, without cross threading. 3/8" Square drive with strong neodymium magnet to hol…
Lisle 64600 Spark Plug Tube Seal Installer
Used to Replace Seals in Valve Covers on Honda 2.4 and 3.5L Engines. The tool helps prevent damage to the seal and valve cover. The seals are replaced to prevent them from going bad which would allow oil to leak on spark plugs causing a misfire to t…
Lisle 64610 Tube Seal Installer
Tube Seal Installer for 64600
Lisle 64620 Tube Seal Installer
Washer 1/2" for 64600
Lisle 65000 Deep Hole Aluminum Head M14x1.25 Spark Plug Hole Repair Kit
Replaces stripped spark plug threads on aluminum heads with 14mm spark plugs. Installs a new spark plug thread location. Set includes one-piece drill tap, long tap holder, short tap holder, insert installer, swedger and handle. Includes three inse…
OTC Tools & Equipment 6898 13/16 Spark Plug Socket
Works on GM, Chrysler, Ford, and many import vehicles with 13/16 spark plugs. Socket end has a soft rubber insert to hold and protect the spark plug during removal and installation. Drive end is 3/8 for use with ratchet or breaker bar.
OTC Tools & Equipment 6899 5/8 Spark Plug Socket
Works on GM, Chrysler, Ford, and many import vehicles with 5/8 spark plugs. Socket end has a soft rubber insert to hold and protect the spark plug during removal and installation. Drive end is 3/8 for use with ratchet or breaker bar.
SK Hand Tool 33310 3/8" Dr Swivel Impact Socket, 5/16"
Made in the U.S.A., featuring the SureGrip hex design, which drives the side of the hex, not the corner. 30 degree flex angle allow for improved access. The smooth collar design protects the user's hand while in use by preventing the pin from working…
SK Hand Tool 33316 3/8" Dr Swivel Impact Socket, 1/2"
Made in the U.S.A., featuring the SureGrip hex design, which drives the side of the hex, not the corner. 30 degree flex angle allow for improved access. The smooth collar design protects the user's hand while in use by preventing the pin from working…
SK Hand Tool 4419 3/8" Dr Spark Plug Socket, 9/16"
100% Made in the U.S.A., featuring SK's high polish SuperKrome finish, which protects the tools from the harsh working environments found in today's workplace. All sockets feature SK's SureGrip hex design, which drives the side of the fastener, not …
SK Hand Tool 4420 3/8" Dr Spark Plug Socket, 5/8"
100% Made in the U.S.A., featuring SK's high polish SuperKrome finish, which protects the tools from the harsh working environments found in today's workplace. All sockets feature SK's SureGrip hex design, which drives the side of the fastener, not…
SK Hand Tool 44214 3/8" Dr Hex Tamper-Proof Bit Socket Chrome, 7/32"
Made in the U.S.A. Bit sockets feature SK's high polish SuperKrome finish, which provides for long life and maximum corrosion resistance. Through-hole design makes it easier to replace worn or broken bits: simply pop the old bit out and insert a new …
Result Pages: