KD Tools Gauges
Displaying 1 to 19 (of 19 products)
GearWrench 3379 14mm Spark Plug Rethreader
Tool features extra-long neck for access to recessed spark plug cavities. Groove and O-ring holds tool in socket. Use with 3/8_ square drive tool or a 5/8_ socket.
GearWrench 162 Feeler Gauge
Gauge measures clearances 0.002 to 0.025_ (0.051 to 0.635mm). It includes a 2-1/2_ rule and 15 blades (see chart below). Blade Lengths: 3-5/16_ long
GearWrench 166 Spark Plug Gap Wire Gauge
Use gauge to measure spark plug electrode gaps from 0.025 to 0.045_(0.635 to 1.143mm). Gauge includes 2 electrode adjusting tools.
GearWrench 2223 Non-Magnetic Feeler Gauge
6-blade gauge measures clearance in electronic ignition systems where non-magnetic blades are required. These hard brass blades will not magnetize. Blade Lengths: 3-5/16 long
GearWrench 2327 Spark Plug Gap Gauge
Gauge measures spark plug electrode gaps on gap plugs from 0.040 to 0.080_ (1.016 to 2.032mm). It includes 2 electrode adjusting tools.
GearWrench 3293 Spark Plug Gap Gauge
Circular coin-type ramp gauge easily measures spark plug gaps from 0.020 to 0.100_ (0.635 to 1.143mm).
GearWrench 161 Deluxe Feeler Gauge
Gauge measures clearances from 0.0015 to 0.035_ (0.038 to 0.889mm). It also includes one 0.010_ brass blade to use with electronic ignitions. Blade Lengths: 3-5/16_ long, Blade Width: 1/2_
GearWrench 162D 15 Blade SAE/Metric Feeler Gauge
Gauge measures clearances from .002 to .025" and .051mm to .635mm Blades have both SAE and metric measurements 2-1/2" rule and 15 blades Blade length: 3-5/16 in Blade width: 1/2 in Each blade has sizes marked for easy identification
GearWrench 163 Valve-Tappet Feeler Gauge
11-blade gauge measures valve tappet clearances from .008_ to .026_. Offset blades provide easy access. Blade Lengths: 3-3/4_ long
GearWrench 163D Replaced By KDT-163
Replaced By KDT-164
GearWrench 164 Spark Plug Gap and Feeler Gauge Set
Use to set and measure spark plug gaps plus other ignition clearances from 0.010 to 0.045_ (0.254 to 1.143mm). Six wire gauges check spark plug gaps and 12 straight blades check other clearances. It includes a double-ended electrode tool for easy adj…
GearWrench 165 Spark Plug Gap Wire Gauge
Gauge measures spark plug gaps from 0.015 to 0.045_ (0.381 to 1.143mm). Double-ended tool is included for adjusting electrodes.
GearWrench 166D 6 Wire SAE/Metric Spark Plug Gap Gauge with 2 Electrode Adjusting Tools
6 Wire SAE/Metric Spark Plug Gap Gauge with 2 Electrode Adjusting Tools Use gauge to measure spark plug electrode gaps from .025" to .045" and .635mm to 1.143mm Gauge includes 2 electrode adjusting tools Most popular "standard ignition" spark plug ga…
GearWrench 2062 Mini Feeler Gauge
Miniature 16-blade feeler gauges are only 1/4_ wide and measure clearances from 0.010 to 0.035_ (0.254 to 0.889mm). Blade Lengths: 1-3/4_ long
GearWrench 2116D Disc Brake Lining Wear Gauge
Gauge measures brake lining remaining on bonded pads in 1/32" graduations Tool checks measurement without removing caliper Insert tips between the edge of the rotor and steel back up plates on the disc pads Measures from 1/8" to 3/4" and 3.1mm to …
GearWrench 2274 Metric Feeler Gauge
25-blade gauge measures clearances from 0.04 to 1mm. Blade sizes: 0.04, 0.05, 0.06, 0.07, 0.08, 0.09, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40, 0.45, 0.50, 0.55, 0.60, 0.65, 0.70, 0.75, 0.80, 0.85, 0.90, 0.95 and 1mm. Blade Lengths: 3_ long
GearWrench 2424 Go-No-Go Feeler Gauge
Gauge checks clearance measurements with a 0.002_ range. Stepped blades quickly indicate if clearance fails within the specified range. Twenty-two etched blades cover the complete range of sizes from 0.004 to 0.027_ (0.10 to 0.69mm). Blade Lengths: 3…
GearWrench 3293D SAE/Metric Spark Plug Gap Gauge
SAE/Metric Spark Plug Gap Gauge Circular coin-type ramp gauge Easily measures spark plug gaps From .020" to .100" and .6mm to 2.4mm Gap spreader tool on top Convenient tether point Satin chrome finish to resist corrosion
Displaying 1 to 19 (of 19 products)