Oil Pump Tools
Displaying 1 to 18 (of 18 products)
Lisle 13200 Oil Pressure Switch Socket
Fits 1" and 1 1/16" Switches Up To 1 5/8" Long. One socket with the correct length to fit 1" and 1 1/16" oil pressure switches (for vehicles equipped with warning lights). 1 7/8" overall height for clearance. Use with 3/8" drive or 1 1/8" hex.
Lisle 13250 Oil Pressure Switch Socket
Fits 1 1/16" Switches Up To 2 5/8" Long, Found on Newer GM and Chrysler Vehicles. Fits 1 1/16" oil pressure sending unit (gauge type), found on most all 91 and newer GM vehicles. Also fits 87 and newer Chrysler vehicles with combination light and gau…
Lisle 13900 Oil Pressure Switch Socket for Ford
Partial hex design to fit 1-13/16" oil pressure switches on some 2015-2017 Ford and Lincoln vehicles with 4 and 6 cylinder engines May also fit some aftermarket sending units Overall socket length is 2" to fit in tight spaces Use with 3/8" square …
OTC Tools & Equipment 6595 Ford High Pressure Oil Line Disconnect
Use to disconnect the high pressure oil line from the cylinder head. Works on 1998 - 2003 Ford vans and trucks with 7.3L direct-injected, turbo-charged (DIT) diesel engines.
OTC Tools & Equipment 7587 Ford Oil Cooler Line Disconnect Tool
Quick-Disconnect Tool releases the finger on the transmission-to-radiator oil cooler line quickly, without damaging the hose or connector. Works on 1986 and newer Ford Tauruses and Mercury Sables with an AXOD, AOD, or ATX transmission.
OTC Tools & Equipment 7943 GM Oil Pump Dr. Removal Tool
On certain GM V-6 engines, the oil pump drive is difficult to get at, making it a real hassle to remove it to repair O-ring leaks. This tool removes the oil pump drive from the engine without first having to remove the exhaust cross-over pipe or othe…
GearWrench 3272 Oil Pressure Sending Unit Socket
Use to remove and replace oil pressure sending units on 1987 throughcurrent GM engines with dash gauges including 2.0, 2.3, 2.5, 2.8 and3.0 L used in Chevy, Buick, Olds, Pontiac and Cadillac cars. Hexopening is 1-3/16_. Turn with 1/2_ square drive to…
GearWrench 3289 Oil Pressure Check Kit
Test engine oil pressure at the oil filter on most passenger cars and light trucks. FIve different adapters are included for both domestic and imported engines. Gauge is calibrated from 0 to 100 PSI.
GearWrench 3448 Ford Oil Pump Printer, 5/16" Hex Drive
Use primers to protect a freshly rebuilt or modified engine from premature wear caused by a dry start. Design includes a machined aluminum collar that stimulates the distributor and helps to eliminate damaging side loading of the oil pump drive whil…
GearWrench 3458 Oil Pressure Sending Unit Socket
Use to remove and install oil pressure switches that require a socket with a 1-1/16_ hex and that are 2-3/4_ deep. Tool can be used with a 3/8_ square drive tool or 15/16_ wrench. Overall length is 3-1/4_.
GearWrench 41770 3 pc. Oil Pump Primer Kit
Oil Pump Primers protect freshly rebuilt or modified engines from premature wear caused by a dry start Kit contents: GM Oil Pump Primer, Ford Oil Pump Primer 5/16" Hex Drive and Ford Oil Pump Primer 1/4" Hex Drive
GearWrench 492 Oil-Seal Remover and Installer
Tool removes and installs upper rear main oil seals with engine and crank-shaft in place. It works on both wick- and neoprene-type seals. Chinese Finger-type grip wont slip from the seal during installation. Set includes a wick seal remover, installe…
OTC Tools & Equipment 6492 Engine Preluber Kit
Ensures oil is present to internal engine components on the first start of a new or rebuilt engine or after major engine work is performed Required to prime the oil pump and fill the oil galleries and internal engine components with clean new oil C…
OTC Tools & Equipment 6492-10 Oil Priming Adapter
This adapter allows for proper engine pre-lubing, preventing dry starts after engine service. The adapter installs into the oil priming port in the oil module. For use with the engine oil primer p/n 6492. For use on Detroit Diesel DD13 and DD15 engin…
OTC Tools & Equipment 7219 Oil Pressure Adapter
Allows for engine oil pressure to be measured Installs in place of oil filter providing ports to attach oil pressure tester Dual port for bottom or side tester connection Installs with 11/16 (17mm) hex drive socket Fits GM 4.8L, 5.3L, 5.7L, 6.0L …
Schley Products 65550 GM Oil Pump Drive Removal Tool
This special tool has been designed to easily remove the oil pump drive on most G.M. V-6 engines with the intake manifold still attached to the engine block and cylinder heads. The oil pump drive is located in a very small area that is surrounded b…
Displaying 1 to 18 (of 18 products)