Timing Belt
Displaying 1 to 16 (of 16 products)
Lisle 37230 Timing Tool for Ford 3.5L TURBO
For use when servicing the timing chain on 2017 and newer Ford V6 3.5L Turbo Engines Updated design is thicker for more strength Surfaces are precisely machined for an exact fit Helps ensure camshaft alignment during the removal and installation o…
OTC Tools & Equipment 7297 Oil Pressure and Prelube Adapter
Easily diagnose engine oil system issues. This adapter installs in place of the spin-on oil filter to allow existing oil pressure gauges to be attached to test oil system pressure. Can also be used to connect prelube equipment to the engine. Applica…
S & G Tool Aid 33650 Top Dead Center Indicator
Tool whistles as the piston approaches Top Dead Center (TDC) on the compression stroke and stops whistling when the piston reaches TDC. Helps to eliminate the guesswork involved when diagnosing jumped timing belts and timing chains. Aids in valve a…
Lisle 37220 1PC TIMING TOOL
Single Replacement Piece for Timing Tool Ford 3.5L Turbo
OTC Tools & Equipment 5853 Rear Seal Installer
Vehicle applications: 2004 - 2007 DT 466 2007 MaxxForce 10 2007 MaxxForce 9 2007 MaxxForce DT 2010 MaxxForce 10 2010 MaxxForce 9 2010 MaxxForce DT 2013 N10 w/SCR 2013 N9 w/SCR 9000i Series Made in USA from global materials.
OTC Tools & Equipment 5855 Rear Seal/Wear Sleeve Inst
Vehicle applications: Pre 2004 530E Pre 2004 DT466E 2004 - 2007 DT 466 9000i Series Made in USA from global materials.
OTC Tools & Equipment 5863 Front Seal Installer
Vehicle applications: 2004 - 2007 VT 275 2004 - 2007 VT 365 2007 MaxxForce 5 Made in USA from global materials. Product Features Installs the front seal and wear sleeve on select Navistar VT and MaxxForce engines Made in USA from global materials
OTC Tools & Equipment 6756 Injector Seal Installer and Sizer Adapters
Ensure replacement injectors and seals are installed correctly. This kit installs the dual seals onto the end of the injector. These seals must be installed into their grooves, and then sized to the engineered dimension before the injectors are insta…
OTC Tools & Equipment 6757 Injector Seal Installer and Sizer Adapters
Ensure replacement injectors and seals are installed correctly. This kit installs the Teflon seal onto the end of the injector. The pilot cone is placed onto the end of the injector and the seal is started over the cone. The installer pushes the seal…
OTC Tools & Equipment 6777 GM Duramax Injector Puller
Assists in removing injectors from the cylinder head without damaging the injector body. Similar to OE tool #EN-49774. Applications include: 2011-later 6.6L Duramax Diesel and Isuzu engines
OTC Tools & Equipment 6787 EVAP Access Port Tool
Diagnose all GM 5/16" EVAP line systems. This adapter connects into the EVAP system line at the canister quick-connect fitting. An EVAP port fitting allows EVAP system testing and diagnosis. Use with the OTC 6522 LeakTamer smoke machine to perfor…
Schley Products 67600 VW/Audi Timing Belt Pulley Holder
This crank pulley holding tool has been developed to aid in the removal and installation of the crank bolt on VW and Audi four cylinder engines. These crank pullets need a special tool to hold the pulley stationary for the crank bolt to be removed an…
Schley Products 67650 VW & Audi Timing Belt Tensioner Release Tool
This unique tool was designed to compress the hydraulic timing belt tensioner when servicing the water pump. The factory screw type tool is hard to use and strips easily. This tool holds the timing belt in place against the cam gear. There will be…
Solar 141-361-666 Charger JNC Units 110 Volt w/ Wiring
Internal Charger for older JNC660, JNC4000, JNC400 Manual charge units.
Displaying 1 to 16 (of 16 products)