Measuring Gauges
Result Pages:
Filter by Brand:
OTC Tools & Equipment 4748 Belt Tension Gauge
This easy to use and read tool allows for accurate belt tension to be set after belt replacement, adjustment, or wheel service. Use on secondary drive belts with a 10 lb. spec. Instructions; 1. Position the small O-ring over the 10 lb. mark. 2. Posit…
GearWrench 2968D Angle Finder with Magnetic Base
Use finder to measure angles of most parts such as frame anglefor setting truck front ends Forward or backward pitch Magnet in the base holds tool in place Graduated in 1/2 increments
Thexton 432 Universal Thread Gauges
Bolts, fittings, pipe threads and spark plugs with US or metric threads are easily identified. Aluminum gauges identify: 1.) US threads from #5 to 3/4 pitch of ~10 TPI to 44 TPI. 2.) Metric threads from 2.5 to 22 mm ~and pitch of .45 to 2.5 mm. 3.) P…
Central Tools 3B531 Digital Drum Gage
4 - 20 range plus oversize Pointed anvils for measuring grooves Depth stops to accurately measure bell mouth Inch/Metric conversion with push of a button Large, easy to read digital display
Central Tools 6429 24" Precision Straight Edge
Use with your feeler gauges to measure head, block, flywheel straightness (warpage) for every application from small engines up to heavy-duty diesels Made from high quality heat treated steel 1/4 thick for great stability Precision ground to +/- 0…
Central Tools 6454 Gage Tire & Wheel Run-Out Set 1in Range
1" range, .001" graduations, 0-100 reading. Includes indicator #4344. Checks tire and wheel run-out, disc brake rotor run-out, and ball joint wear. Large radius contact checks radial run-out. Roller contact checks wheels and sidewalls. 8" extens…
Central Tools 6460 Cylinder Bore Gauge - 2.125 to 7
Central offers several different Engine Service Tools. Some models come with a magnetic or locking plier mount. Highly accurate.
Central Tools 6463 Cylinder Bore Gauge/Dial Bore Gauge 66-175mm
Periscope style. Measure cylinder wear without removing pistons. Measures bores up to 8 inches deep. Check cylinder diameter when used with a micrometer. Contact extensions included. Range: 66-175 mm Graduations: .02 mm Reading: 0-2.0
Central Tools 6514 6" Precision Rules(Flexible Pocket)
Made of top quality stainless steel ground and tempered.
Central Tools 6554 Telescoping Gauge Set
Checks cylinders, recesses, slots. Long handles for deep measurements (up to 5-1/2 on largest) Both contacts release or lock by turning knob at end of handle Measurement is taken with micrometer (not included) Includes 6 pieces: 5/16-1/2, 1/2-3/4…
Kastar Hand Tools 1610 14-Blade Valve Lash Gauge
1/4" wide gauge blades can be used to check valve clearances of small diameter bucket and shim type valve trains. Standard 1/2" wide blades may contact the cylinder head and not provide the proper clearance "feel". 14-pc. set of 4" x 1/4" feeler ga…
Kastar Hand Tools 3079 FEELER GAUGER VALVE LASH
Master Feeler Gauge Set fod H.D. Truck Valve Adjustment
Kastar Hand Tools 5469 DBL ENDED PLASTIC HNDL FEELER
Double End Handle for Feeler Gauge Blades
Result Pages: