Bead Breaking Tools
Displaying 1 to 17 (of 17 products)
OTC Tools & Equipment 4750 Tire Valve Installation & Removal Tool
14-inch steel tire valve tool Comes with a stepped rubber sleeve that can be easily positioned on the handle for optimum pulling angle Protects the wheel finish Installs and removes tire valves with snap-in style
Titan 12018 1/2" Dr, Ratcheting Breaker Bar 18"
1/2" drive ratchet head swivels 180_ Heavy duty chrome vanadium steel construction Maximum torque: 376 ft/lbs. (52 kg/m) 3-way ratcheting action: right-hand thread, left-hand thread or lock Chrome plated bar and black oxide finish on head to resi…
Titan 12024 1/2" Dr, Ratcheting Breaker Bar, 24"
1/2" drive ratchet head swivels 180_ Heavy duty chrome vanadium steel construction Maximum torque: 376 ft/lbs. (52 kg/m) 3-way ratcheting action: right-hand thread, left-hand thread or lock Chrome plated bar and black oxide finish on head to resi…
Titan 12028 Ratcheting Breaker Bar Replacement Head for 12018 & 12024
Ratcheting Breaker Bar Replacement Head for 12018 & 12024 1/2in. Drive Bulk
Ken-Tool 31554 : 3-1/2"-14" Ratchet Action Truck Tire Spreader
Spread Capacity: 3-1/2"-14" (9-36 cm) Weight: 7.3 lbs (3.3 kg)
Ken-Tool 35449 39" Serpent Demount Tool
Demounts both beads on most truck tires without the need for lifting the tire/wheel assembly off the ground, and then dropping it Made of heat-treated alloy steel for maximum durability and strength
Ken-Tool 35453 4 Pc. Serpent Tire Changing Set
Set includes: Serpent Demount Tool (35449) Serpent Mount Tool (35450) Brass Bead Holding Device (31710) Aluminum Wheel Protector (31810)
Ken-Tool 35924 46" Economy Impact Bead Breaker
Bead breaker loosens beads with bead-breaking foot and ram bar, but never cuts the bead of the tire The wedge foot is forced between the bead and rim flange Breaker is designed for shop or road use No other bead breaking tools are necessary Provi…
OTC Tools & Equipment 4749 CHAIN ALIGNMENT TOOL
Chain Alignment Tool
OTC Tools & Equipment 4771 Tire Bead Alignment Tool
This aluminum tool will hold a tire bead into the drop center of the wheel when changing the tire or installing an inner tube. The nylon thumbscrew will not damage the wheel finish.
OTC Tools & Equipment 4775 Tire Bead Holding Tool, Std.
This tool allows the tire bead to be held in the drop center of the wheel when changing the tire or installing an inner tube. The slot slides over the spoke and the opposite end is depressed to push the tire into position. For use on wheels with 3/4"…
OTC Tools & Equipment 4777 Tire Bead Holding Tool, Long
This tool allows the tire bead to be held in the drop center of the wheel when changing the tire or installing an inner tube. The slot slides over the spoke and the opposite end is depressed to push the tire into position. For use on wheels with 1 5/…
OTC Tools & Equipment 5728 Tire Bead Breaker
Unique head is designed to provide a large striking area for all angles, while providing the mass needed to break the tire bead. This design puts the force exactly where it's required and eliminates the possibility of accidentally hitting the wheel,…
OTC Tools & Equipment 5729 Dual Wheel Inboard Bead Breaker Bar
Breaks the inner bead on the outside tire without removing the wheel from the truck Unique design places pressure in the exact location required to quickly and easily break the inner bead Simply pull up on the handle and the bead is forced off the …
GearWrench 87912 2 Pc. 1/4" & 3/8" Drive Flex Extension Set 6" & 8"
Flex shaft allows extension to bend into multiple positions Reach difficult to access fasteners that standard sockets/extensions cannot reach Designed to access extreme angled fasteners, for use in low torque applications 1/4 drive, 6 length flex…
Ken-Tool 34555 SHARK FIN DUAL WHEEL SEPARATN
The unique Shark Fin bag is an extreme-duty, rubber coated, nearly puncture proof Kevlar bag which uses air pressure to create 5000 pounds of force to separate and remove stuck dual wheels off the axle studs and hubs. Unlike any other dual wheel sep…
Displaying 1 to 17 (of 17 products)