Displaying 1 to 25 (of 152 products)
Depresses and Holds Clutch Pedals and Brake Pedals. The two-piece, telescoping tool extends to the pedal and locks in position. Brace the formed plate against the seat or the steering wheel for firm support. Tool extends from 18 1/2" to 34 1/2".
Brand: | Lisle |
Part #: |
21520 |
UPC: |
083045215202 |
Weight: |
3.8 lbs |
Condition: | New |
Small Adapter C with Gasket for Spill Free Funnel
Brand: | Lisle |
Part #: |
22450 |
UPC: |
083045224501 |
Weight: |
0.1 lbs |
Condition: | New |
Easily installs new wheel studs Use with a ratchet or impact wrench to pull the new stud securely in place Position the tool over the stud shaft Tighten the lug nut against the tool to pull the stud in place Works on most all automotive and light…
Brand: | Lisle |
Part #: |
22800 |
UPC: |
083045228004 |
Weight: |
0.44 lbs |
Condition: | New |
Adapter D and Gasket for GM
Brand: | Lisle |
Part #: |
24650 |
UPC: |
083045246503 |
Weight: |
0.5 lbs |
Condition: | New |
1-5/8" Adapter Adapter 2A - 1-5/8" most Nissans/Datsuns and Subarus Adapter 2B - 1-5/8" Mazda 3, some Jaguar and some Mini Cooper
Brand: | Lisle |
Part #: |
25110 |
UPC: |
083045251101 |
Weight: |
0.29 lbs |
Condition: | New |
Adapter E with Gasket for Ford for Spill-Free Funnel
Brand: | Lisle |
Part #: |
25390 |
UPC: |
083045253907 |
Weight: |
0.25 lbs |
Condition: | New |
Installs most truck wheel studs in seconds Use with an impact wrench or ratchet The tool body is equipped with a thrust bearing to easily pull the new wheel stud into place Fits truck wheel studs up to 22mm (7/8) diameter Use the lug nut to tight…
Brand: | Lisle |
Part #: |
28950 |
UPC: |
083045289500 |
Weight: |
0.63 lbs |
Condition: | New |
The KEN-35442 Blue Cobra Truck Tire Service Set contains all the tools you need to change most 22.5" & 24.5" tubeless truck tires, up to a 425mm on a 13" wide wheel Set contains: 1 - KEN-35440 Blue Cobra Truck Tire Demount Tool 1 - KEN-34645C T45A…
Brand: | Ken-Tool |
Part #: |
35442 |
UPC: |
0703382354425 |
Weight: |
40 lbs |
Condition: | New |
Double-ended to disconnect air lines even in hard-to-reach areas. Angled end allows maximum leverage. Smaller end fits in tight spots. Disconnects air systems on brakes, suspension, steering, engine, transmission and other auxiliary equipment. Also…
Brand: | Lisle |
Part #: |
42470 |
UPC: |
083045424703 |
Weight: |
0.05 lbs |
Condition: | New |
2.375-2.625 Range For small oil and fuel filters. Special narrow band fits in tight spots.
Brand: | Lisle |
Part #: |
57010 |
UPC: |
083045570103 |
Weight: |
0.75 lbs |
Condition: | New |
Threads into the filter for a secure seal so the filter can be removed from the tight space without spilling oil T-handle makes removal and installation easier The tool also allows the technician to pre-lube the filter before installation
Brand: | Lisle |
Part #: |
57180 |
UPC: |
083045571803 |
Weight: |
0.2 lbs |
Condition: | New |
For Import Car Filter Wrench (63600)
Brand: | Lisle |
Part #: |
63630 |
UPC: |
083045636304 |
Weight: |
0.06 lbs |
Condition: | New |
Brake Tool Set (8 piece) Set contains the most popular brake tools for servicing drum brakes on many import and domestic vehicles. Features BMC and high quality handles. Includes three different brake spoons to adjust most brake drums, five differ…
Brand: | OTC |
Part #: |
6516 |
UPC: |
0731413041136 |
Weight: |
5.05 lbs |
Condition: | New |
10 Pack of Threaded Inserts
Brand: | Lisle |
Part #: |
66130 |
UPC: |
083045661306 |
Weight: |
0.5 lbs |
Condition: | New |
For brake adjustment on heavy-duty trucks equipped with Haldex slack adjusters Extra-long handle provides comfort while overcoming the anti-reverse mechanism (22-25 lbs./ft.)
Brand: | Kastar Hand Tools |
Part #: |
7578 |
UPC: |
077769075785 |
Weight: |
0.72 lbs |
Condition: | New |
Includes heavy duty Grade 8 drive bolt for twice the durability of the industry standard Replace wheel bearings without the need for alignment after by keeping the strut assembly and steering knuckle in place during service Master set for a wide ra…
Brand: | Astro Pneumatic |
Part #: |
78825 |
UPC: |
745227024490 |
Weight: |
28.1 lbs |
Condition: | New |
Includes two clamp holders and four clamps
Brand: | SUR&R Auto Parts |
Part #: |
AC371010 |
UPC: |
0812337011082 |
Weight: |
1 lbs |
Condition: | New |
3/8" A/C Compression Union(1)
Brand: | SUR&R Auto Parts |
Part #: |
AC38 |
UPC: |
812337011846 |
Weight: |
0.6 lbs |
Condition: | New |
5/16 - 24NF Bleeder Screw (5)
Brand: | SUR&R Auto Parts |
Part #: |
BB03 |
UPC: |
0812337010436 |
Weight: |
1.1 lbs |
Condition: | New |
Works with both aluminum and cast iron calipers 5 Pack
Brand: | SUR&R Auto Parts |
Part #: |
BB06 |
UPC: |
0812337010450 |
Weight: |
1 lbs |
Condition: | New |
M8 x 1.0 Bleeder Screw (5)
Brand: | SUR&R Auto Parts |
Part #: |
BB10 |
UPC: |
0812337011211 |
Weight: |
0.08 lbs |
Condition: | New |
Brake Bleeder Screw Pins
Brand: | SUR&R Auto Parts |
Part #: |
BBPIN |
UPC: |
0812337010542 |
Weight: |
1.2 lbs |
Condition: | New |
Flexible brake tubing makes routing and installation simple No bending tools required
Brand: | SUR&R Auto Parts |
Part #: |
BR14 |
UPC: |
0890453002108 |
Weight: |
3 lbs |
Condition: | New |
M13 x 1.5 Bubble Flare Nut (4)
Brand: | SUR&R Auto Parts |
Part #: |
BR2300 |
UPC: |
0812337010085 |
Weight: |
0.12 lbs |
Condition: | New |
Provides more durable sealing power Reduced outer dimension for less interference 10 per package
Brand: | SUR&R Auto Parts |
Part #: |
BRC147 |
UPC: |
0812337011617 |
Weight: |
1 lbs |
Condition: | New |
Displaying 1 to 25 (of 152 products)