Displaying 1 to 25 (of 49 products)
Pneumatic bushing driver set removes and installs truck and trailer 1-3/8" anchor pin bushings and stuck anchor pins Includes a 7-3/4" extension that allows bushings to be driven straight without removing the hub assembly Drive the bushing out with…
Brand: | Lisle |
Part #: |
28870 |
UPC: |
083045288701 |
Weight: |
3 lbs |
Condition: | New |
Also removes truck leaf spring bushings Pneumatic bushing driver set removes and installs truck and trailer anchor pin bushings and stuck anchor pins Drive the bushing out with the small cone Use the larger cone to install bushing to the proper de…
Brand: | Lisle |
Part #: |
28890 |
UPC: |
083045288909 |
Weight: |
1.2 lbs |
Condition: | New |
The Extra Deep 15/16" Works Well on the 30/36 Spring Brakes for Autocar, CCC Style Dump Trucks, and Garbage Trucks with MGM Brakes It can also be used to remove fuel tank saddle clamps, headache rack U-bolts, and S-Cam brackets caging bolts The soc…
Brand: | Lisle |
Part #: |
49020 |
UPC: |
083045490203 |
Weight: |
1.13 lbs |
Condition: | New |
This tool aligns clutch plates and pilot bearings accurately so the shaft can be easily and quickly inserted on the first try. Shaft and bushings combine to provide an accurate fit for (8) pilot bearing sizes. (2) specially turned sizes 1" and 1-1/8"…
Brand: | Lisle |
Part #: |
55500 |
UPC: |
083045555001 |
Weight: |
1.2 lbs |
Condition: | New |
Truck King Pin & Brake Anchor Pin Pusher
Brand: | OTC |
Part #: |
4240 |
UPC: |
0731413009587 |
Weight: |
114 lbs |
Condition: | New |
Includes large, medium, and small driver handles with nuts; fourteen bushing adapters ranging from 10mm to 42mm.
Brand: | OTC |
Part #: |
4407 |
UPC: |
0731413504846 |
Weight: |
2 lbs |
Condition: | New |
Professional Style Seal Puller Designed to remove oil and grease seals when servicing cars, SUVs, and light trucks without damaging the housing or bearing. Hook tips in two sizes and professional handle design allows removal of hard-to-get-at seals…
Brand: | OTC |
Part #: |
4508 |
UPC: |
0731413039461 |
Weight: |
1.05 lbs |
Condition: | New |
This kit includes five popular tools used for servicing Pitman arms, ball joints, and tie rods on most vehicles Set includes: Two Pitman Arm Pullers for large or small ball joint applications Two Ball Joint Separators Three different Tie Rod Pull…
Brand: | OTC |
Part #: |
6295 |
UPC: |
0731413038440 |
Weight: |
12.8 lbs |
Condition: | New |
Correctly installs the seal onto the axle shaft and into the wheel knuckle, preventing front hub vacuum leaks that would cause the 4WD to not engage. Works on 2005-newer Ford F-250, F-350, 4X4s having the vacuum-operated front axle.
Brand: | OTC |
Part #: |
6697 |
UPC: |
0731413548796 |
Weight: |
14 lbs |
Condition: | New |
Correctly installs the seal onto the axle shaft and into the wheel knuckle, preventing front hub vacuum leaks that would cause the 4WD to not engage. Works on 2005-newer Ford F-450, F-550, 4X4s having the vacuum-operated front axle.
Brand: | OTC |
Part #: |
6698 |
UPC: |
0731413548789 |
Weight: |
14.4 lbs |
Condition: | New |
Eight piece kit contains the tools needed to service lower ball joints on 2004'07 Dodge Sprinter vans: tie rod remover / separator; wheel alignment studs; ball joint remover; driver, receiver, and installing rings. Use this kit with OTC No. 6736 C…
Brand: | OTC |
Part #: |
6735 |
UPC: |
0731413545078 |
Weight: |
12.4 lbs |
Condition: | New |
Upper Control Arm Bushing Service Set Now you can easily replace press-in type upper control arm bushings on most rear wheel drive Chrysler, Ford, and GM vehicles. Mechanical screw power does the work. Set includes C-frame, screw assembly, and all ad…
Brand: | OTC |
Part #: |
7068 |
UPC: |
0731413009839 |
Weight: |
8.9 lbs |
Condition: | New |
GM Upper Control Arm Knock-Out Tool Heres the tool you need to remove the inserts on the upper control arm alignment brackets of light-duty GM trucks. It features an indexed forcing bolt that pulls straight and evenly, and works with off-center knock…
Brand: | OTC |
Part #: |
7491C |
UPC: |
0731413037085 |
Weight: |
0.6 lbs |
Condition: | New |
4WD Front Spindle Puller This puller enables you to remove the front spindle on light-duty 4WD trucks. Its designed for full-size Ford, GM, International, and Jeep pickups with Dana front axles. Also works on Ford Ranger and Bronco II. 5/8" fine thr…
Brand: | OTC |
Part #: |
7502 |
UPC: |
0731413001499 |
Weight: |
2.6 lbs |
Condition: | New |
Upper Arm Alignment Wrench This specialized 1/2" drive wrench provides easy access to the upper control arm bolts for front wheel alignment jobs. No. 7537 18 mm hex wrench for use on U.S.-built 1985 to 90 GM Astro vans.
Brand: | OTC |
Part #: |
7537 |
UPC: |
0731413004728 |
Weight: |
0.8 lbs |
Condition: | New |
Alignment Assist ToolWith this tool, you wont need to remove tires to adjust thecamber on most GM and some Chrysler FWD vehicles.The tool sits on top of a tire and presses against the strut toprevent the tire from moving, allowing you to do theadjust…
Brand: | OTC |
Part #: |
7676 |
UPC: |
0731413012105 |
Weight: |
3.1 lbs |
Condition: | New |
Ford Torsion Bar Adjustment Tool Before servicing a torsion bar on 19952001 Ford Explorer and 19982001 Mercury Mountaineer vehicles, you must first contain the bar to avoid possible damage. This tool securely accomplishes that task, allowing you to m…
Brand: | OTC |
Part #: |
7816 |
UPC: |
0731413024139 |
Weight: |
4.1 lbs |
Condition: | New |
Safely remove the plastic vacuum hubs on Ford pickups. Has special clips that slip into slots on the hub to release it. For use on 1998 to current 4WD Ranger, F-250, andF-350 models with vacuum front hubs.
Brand: | OTC |
Part #: |
7932 |
UPC: |
0731413029523 |
Weight: |
0.9 lbs |
Condition: | New |
Use sets to remove and insert bushings such as those in cars, trucks, buses, tractors, construction and off-road equipment. Sizes are stamped on each bushing adapter. To use, select proper size adapter and drive bushing into place.
Brand: | KD Tools |
Part #: |
31430 |
UPC: |
082171314308 |
Weight: |
4.9 lbs |
Condition: | New |
This versatile set allows for easy removal of the most popular types of Pitman arms, tie rods, and ball joints Kit Contents: 2289 Pitman Arm Puller 22 x 140mm, 3533 Tie Rod Puller, 3916 Universal Ball Joint Separator, 3917 Tie Rod End Puller and Pit…
Brand: | KD Tools |
Part #: |
41690 |
UPC: |
082171416903 |
Weight: |
12.65 lbs |
Condition: | New |
Instant and direct toe-in, toe-out_ reading for all vehicles. Inexpensive and easy to use. Simple instructions have metric conversion scale if required. Standard cars, trucks & buses
Brand: | S&G Tool Aid |
Part #: |
61500 |
UPC: |
0638570615005 |
Weight: |
3.62 lbs |
Condition: | New |
Instant and direct toe-in, toe-out_ reading for all vehicles. Inexpensive and easy to use. Simple instructions have metric conversion scale if required.
Brand: | S&G Tool Aid |
Part #: |
61600 |
UPC: |
638570616002 |
Weight: |
3.38 lbs |
Condition: | New |
A companion aid to Cat. No. 66000. Engineered for modern cars and light trucks. Designed to handle all types of tires. Provides full 100_caster swing. Designed to be used as portable floor units or on stands, racks or pits. These turntables indicate …
Brand: | S&G Tool Aid |
Part #: |
66200 |
UPC: |
638570662009 |
Weight: |
61.46 lbs |
Condition: | New |
The Front End Service Kit Includes five tools used in the servicing of ball joints pitman arms and tie rods on most vehicles. A large and small Pitman arm puller for ball Joint applications. Three different tie rod pullers. Two ball joint separato…
Brand: | Cal-Van Tools |
Part #: |
185 |
UPC: |
047084001851 |
Weight: |
12.7 lbs |
Condition: | New |
Turns smooth tie rods easily. Simply slide tool over the end and tighten collar to allow access with an extension. Can remove Inner tie rod without removing the outer tie rod No more bulky tool to store. Inexpensive and effective way to turn thes…
Brand: | Cal-Van Tools |
Part #: |
946 |
UPC: |
047084009468 |
Weight: |
1 lbs |
Condition: | New |
Displaying 1 to 25 (of 49 products)