CV Joint Tools
Displaying 1 to 15 (of 15 products)
SUR&R Auto Parts CP90 Heavy Duty Ratcheting Seal Clamp Pliers
Ratcheting action provides maximum leverage for making secure high-pressure connections Numerous applications including fuel lines, A/C lines, transmission lines and CV axle boots Use with 1/4 to 1 clamp sizes Heavy Duty construction for long last…
Lisle 30500 CV Boot Clamp Pliers
For Earless-Type Clamps. A sturdy, low-cost tool. Works on earless-type clamps including those found on GM inboard CV joints.
OTC Tools & Equipment 7140 Escort/Lynx Half-Shift Remover/Differential Rotator
Essential tool for removing the left-hand half shaft from Escort/Lynx transaxles. It ensures correct removal and allows the technician to turn the differential.
OTC Tools & Equipment 7507 Universal Inner C.V. Joint Puller
No. 7507 CV joint fork only. Use with OTC slide hammer No. 1155, extension No. 7508, or both.
OTC Tools & Equipment 7509 Inner CV Joint Slide Hammer Puller
OTC inner CV joint slide hammer puller pulls CV joints on 1986-current Taurus/Sable. Will also pull other joints having hidden retaining rings. Pry bars can damage expensive aluminum transmission cases, and attempting to do the job by pulling on the …
GearWrench 3164 Inner CV Joint Puller Adapter
Used with 2-1/2-lb slide hammer (2290), this tool will pull most CV joints that use a hidden snap ring to hold them in the transaxle. Inner CV Joint Puller fits slide hammer with 1/2_-13 UNC threads.Works on GM and some Ford vehicles.
GearWrench 3191 CV Joint Boot Clamp Tightening Wrench
Use wrench to securely fasten Band-it style free end clamps, roll band and clips or Band-itJr. style pre-formed CV Boot Clamps. The tool is used by turning the winding mandrel with a 1/2 socket or wrench. The mandrel tightens the clamp, holding i…
GearWrench 3955 CV Boot Clamp Tool
Allows for proper installation of CV boot Crimps joints while with center pushing feature Works with hand, 1/2" drive ratchets, or torque wrench High leverage design
Steck 71410 Axle Popper
Half Shafts are sometimes difficult to break loose with a pry bar Saves time as the Axle Popper Kit is quick and sure every time Safer than using a pry bar as the Axle Poppers wedge forked end applies even pressure to both sides of the shaft for su…
OTC Tools & Equipment 4623 CV Joint Banding Tool and Cutter
Use to install and tighten the band-it or strap style clamps on CV joint boots, or on power steering rack and pinion steering gear boots. Once installed into the tool, tighten the band by turning the handle on the tool; use a socket or wrench on the…
OTC Tools & Equipment 4724 CV Boot Clamp Pliers
Special tips work on the ear-less type CV boot clamps. Grips clamp in many positions to tighten clamp around boot.
OTC Tools & Equipment 7085 Dust Boot Clamp Installer
Dust Boot Cap Installer Works on all vehicles with band-type boot clamps (up to 1/4" wide & .020" thick). The clamp must be installed correctly after servicing to prevent moisture and foreign material from entering the CV joint area. This tool provid…
OTC Tools & Equipment 7995 Outer C.V. Joint Remover
Outer CV Joint Remover Removes the outer CV joint on most front-wheel drive vehicles with a concealed internal circlip. Use with OTC No. 1155 or 1156 slide hammer with 5/8-18 UNF thread. No. 7995 Outer CV joint remover.
Steck 71415 Axle Popper II
The Axle Popper II, the air tool version of our popular Axle Popper, breaks loose half shafts from transaxle on front wheel drive vehicles. The Axle Popper II is the air tool version of our original Axle Popper Fork (PN 71411). Like our original for…
Displaying 1 to 15 (of 15 products)