Displaying 1 to 24 (of 24 products)
Quickly Removes the U-Joint Cap from the Drive Shaft on Most Rear Wheel Drive Vehicles. Use the driver with an air hammer to remove u-joint caps up to 1-5/16" diameter. Prevents damage to drive shaft and axle shaft ears, when presses or chisels ar…
Brand: | Lisle |
Part #: |
18980 |
UPC: |
083045189800 |
Weight: |
1.25 lbs |
Condition: | New |
2-5/8" opening, 3" depth, 4" length, 6 points. Designed and built to have the proper clearance for yoke and locknut assemblies on a variety of truck transmissions and differentials. Eliminates the need to destroy standard sockets by grinding them dow…
Brand: | OTC |
Part #: |
1979 |
UPC: |
0731413008153 |
Weight: |
3.7 lbs |
Condition: | New |
Forcing screw, washer, bolt.
Brand: | OTC |
Part #: |
5190-3 |
UPC: |
731413453205 |
Weight: |
0.8 lbs |
Condition: | New |
For use with the 7248 C-Frame to service the u-joints found on Dana 60 4WD front drive axles.
Brand: | OTC |
Part #: |
6935 |
UPC: |
0731413570599 |
Weight: |
1 lbs |
Condition: | New |
Services Spicer 1600/1610 1880 series U-joints; and Rockwell 16N, 17N, 18N, and 1710 series U-joints.
Brand: | OTC |
Part #: |
7057 |
UPC: |
0731413001918 |
Weight: |
15.9 lbs |
Condition: | New |
Transmission output shaft end yoke remover.
Brand: | OTC |
Part #: |
7075 |
UPC: |
0731413005367 |
Weight: |
10 lbs |
Condition: | New |
This helpful tool uses a forcing-screw press to safely remove and replace automotive universal joints with needle bearings, including GM plastic pin CV U-joints
Brand: | OTC |
Part #: |
7248 |
UPC: |
0731413000928 |
Weight: |
10 lbs |
Condition: | New |
Easily removes stubborn heavy-duty U-joints on Dana and Rockwell driveshaft assemblies.
Brand: | OTC |
Part #: |
7490 |
UPC: |
0731413011313 |
Weight: |
10.5 lbs |
Condition: | New |
Use in conjunction with 3421 Ball Joint/U-Joint/Anchor Pin Press Set to remove lower ball joints on Ford vans. Applications: 1992 and newer Ford E-250 and E-350 _ and 1 ton full size vans.
Brand: | KD Tools |
Part #: |
3480 |
UPC: |
082171034800 |
Weight: |
1.36 lbs |
Condition: | New |
Chrome Molybdenum Alloy Steel (Cr-Mo) for Exceptional Strength and Long Lasting Durability Manganese Phosphate Coating to Resist Corrosion Meets or Exceeds ASME B107.2
Brand: | KD Tools |
Part #: |
80671 |
UPC: |
099575806711 |
Weight: |
0.33 lbs |
Condition: | New |
3/8" Drive Magnetic U-Joint
Brand: | KD Tools |
Part #: |
81256 |
UPC: |
099575812569 |
Weight: |
0.16 lbs |
Condition: | New |
Strong Magnetic Tips Allow for Contact Through the Base of the Socket to Hold Nuts and Bolts in Place During Use Universal Joint Allows for Greater Access
Brand: | KD Tools |
Part #: |
81257 |
UPC: |
099575812576 |
Weight: |
0.5 lbs |
Condition: | New |
Impact Grade Sizes include: 1-3/8, 3/8-1/4, 3/8-1/2 ,1/2 - 3/8, 1/2 - 3/4
Brand: | Titan |
Part #: |
16150 |
UPC: |
0802090161506 |
Weight: |
1.7 lbs |
Condition: | New |
Works on all Chrysler/Dodge minivans plus most other front wheel drive universal joint steering shaft assemblies connected with a roll pin Works with air impact chisel Magnetic tip aids in removal and insertion of roll pins Machined from hardened …
Quickly and Easily Removes Sealed U-Joint Caps without Damage to Driveshafts, Yokes or Bearing Caps. Works on many cars, trucks and Ag equipment. Heat-treated threads and casting for durability. The 42890 works on cars, light-duty trucks and Ag equi…
Brand: | Lisle |
Part #: |
42890 |
UPC: |
083045428909 |
Weight: |
3.25 lbs |
Condition: | New |
Quickly and Easily Removes Sealed U-Joint Caps without Damage to Driveshafts, Yokes or Bearing Caps. Works on many cars, trucks and Ag equipment. Heat-treated threads and casting for durability. The 42900 works on cars, medium-duty trucks, Ag equipm…
Brand: | Lisle |
Part #: |
42900 |
UPC: |
083045429005 |
Weight: |
4.88 lbs |
Condition: | New |
This heavy-duty tool is used to remove the HD vehicle driveline U-joints using an impact wrench up to 1-inch Disassemble and reassemble U-joint cups without heat or hammering Larger diameter threaded shaft can handle U-joints that are severely seiz…
Brand: | OTC |
Part #: |
5190A |
UPC: |
731413577536 |
Weight: |
12.95 lbs |
Condition: | New |
3 Piece Magnetic -U-Joint Set
Brand: | KD Tools |
Part #: |
81236D |
UPC: |
099575812361 |
Weight: |
1 lbs |
Condition: | New |
Set Includes: 3/4" F to 1/2" M, 1/2" F to 3/8" M & 3/8" F to 1/4" M Impact Grade Chrome Molybdenum construction Includes blow mold case
Brand: | Titan |
Part #: |
12036 |
UPC: |
0802090120367 |
Weight: |
0.3 lbs |
Condition: | New |
Impact Grade Packaged in EVA foam Includes: 1/4", 3/8, and 1/2 Drive
Brand: | Titan |
Part #: |
16151 |
UPC: |
0802090161513 |
Weight: |
1.7 lbs |
Condition: | New |
A heavy duty solution for disassembling even the most seized stubborn U-joints in minutes on virtually all Class 7 and 8 trucks and machinery. Engineered for use with up to a 1? impact tool. Eliminates dangerous vice and socket, or hammering remova…
Brand: | Cal-Van Tools |
Part #: |
199 |
UPC: |
047084001998 |
Weight: |
12.1 lbs |
Condition: | New |
Use with a up to a 1 drive impact to easily remove seized yokes Tool creates more than 20,000 pounds of pulling force For Spicer, Meritor/Rockwell series full and half round yoke sizes: 1610/16N, 1710/17N, 1760/176N, 1810/18N, SPL140/170/250 Limit…
Brand: | Cal-Van Tools |
Part #: |
497 |
UPC: |
047084004975 |
Weight: |
1.1 lbs |
Condition: | New |
Eliminates dangerous vice and socket or hammering methods Can be used on aluminum driveshafts Does not damage the driveshaft, yokes, joints or bearing cups U-Joints with bearing cups 1? to 1.25? O.D.
Brand: | Cal-Van Tools |
Part #: |
905 |
UPC: |
047084009055 |
Weight: |
3.22 lbs |
Condition: | New |
For disassembling even the most seized U-joints in minutes on most intermediate trucks, school buses, farm and light industrial vehicles. Eliminates dangerous vice and socket or hammering methods. Reduces risk of damage to the driveshaft, yokes, joi…
Brand: | Cal-Van Tools |
Part #: |
907 |
UPC: |
047084009079 |
Weight: |
5.08 lbs |
Condition: | New |
Displaying 1 to 24 (of 24 products)