Lowest Prices
Free Returns
Online Since 2009


Result Pages:

Lisle 25000 Rear Wheel Disc Brake Tool

Lisle
For rotating pistons back into the caliper to provide clearance for new pads Includes 5 adapters for both 2 and 4-wheel rear disc brake assemblies Tool may be used on or off the car Helps prevent damage to the piston and boot
On Sale:

$68.27

Avail:
4 in Stock
Warehouse: US-23
Qty:

Lisle 81850 Combination Brake Lining Thickness Gauge Set

Lisle
The 9 Pc. Manual Brake Gauge Set allows brake pad wear to be accurately and consistently measured without guessing Designed to check both straight on or at a 90 angle to the rotor with offset tips so the gauges can be used without removing the wheel
On Sale:

$16.05

Avail:
3 in Stock
Warehouse: US-7
Qty:

OTC Tools & Equipment 6596 Brake Pad Measurement Gauge

OTC
The 6596 Brake Pad Gauge allows for a definitive measurement of brake pads to determine remaining life Unique design allows for measurement on the vehicle without the removal of any components in most cases (wheel assembly or brake caliper) Quick r
On Sale:

$26.20

Avail:
9 in Stock
Warehouse: US-4
Qty:

Central Tools 3B631 Wheels on Trailer Drum Gage

Central Tools
Allows for wear inspection of trailer drums without removing the wheel. The offset arms allow for reach around most axle hardware, the company says. The tool includes two pointed anvils for checking grooves, and an 18" range accommodates most veh
On Sale:

$211.14

Avail:
7 in Stock
Warehouse: US-10
Qty:

Central Tools 3K301 Caliper Jaw Kit for Measuring Rotors

Central Tools
Attaches to any caliper on the lower jaws. Outward facing anvil to inspect drums 8-13.00/200mm-325mm range plus oversize. Inward pointing anvils measures all rotors Flat and pointed anvils to inspect drums and rotors before turning or replacing them.
On Sale:

$68.19

Avail:
5 in Stock
Warehouse: US-10
Qty:

Lisle 83400 83400 Truck Brake Lining Gauge Set

Lisle
The 9 Piece Manual Brake Gauge Set Allows Brake Pad Wear to be Accurately and Consistently Measured without Guessing. Designed to check both straight on or at a 90 angle to the rotor with offset tips. Brake lining gauges identify thickness levels fo
Avail:
0 in Stock
Warehouse: US-10

Lisle 83410 Brake Gauge 6MM/.2362

83410 Brake Gauge 6mm/.2362" Special Design Works Straight on or at 90
Avail:
0 in Stock
Warehouse: US-10

Lisle 83420 Brake Gauge 8MM/.3150

83420 Brake Gauge 8mm/.3150" Special Design Works Straight on or at 90
Avail:
0 in Stock
Warehouse: US-10

Lisle 83430 Brake Gauge 10MM/.3937

83430 Brake Gauge 10mm/.3937" Special Design Works Straight on or at 90
Avail:
0 in Stock
Warehouse: US-10

Lisle 83440 Brake Gauge 12MM/.4724

83440 Brake Gauge 12mm/.4724" Special Design Works Straight on or at 90
Avail:
0 in Stock
Warehouse: US-10

Lisle 83450 Brake Gauge 14MM/.5511

83450 Brake Gauge 14mm/.5512" Special Design Works Straight on or at 90
Avail:
0 in Stock
Warehouse: US-10

Lisle 83460 Brake Gauge 16MM/.6299

83460 Brake Gauge 16mm/.6299" Special Design Works Straight on or at 90
Avail:
0 in Stock
Warehouse: US-10

Lisle 83470 Brake Gauge 18MM/.7086

83470 Brake Gauge 18mm/.7087" Special Design Works Straight on or at 90
Avail:
0 in Stock
Warehouse: US-10

Lisle 83480 Brake Gauge 20MM/.7874

83480 Brake Gauge 20mm/.7874" Special Design Works Straight on or at 90
Avail:
0 in Stock
Warehouse: US-10

Lisle 83490 Brake Gauge 22MM/.8661

83490 Brake Gauge 22mm/.8661" Special Design Works Straight on or at 90
Avail:
0 in Stock
Warehouse: US-10
Avail:
0 in Stock
Warehouse: US-2

GearWrench 2116 Disc Brake Lining Wear Gauge with Fractional Scale

KD Tools
Gauge measures brake lining remaining on bonded pads in fractionsfrom 1/16 to 5/8 in 1/32 graduations. Tool checks measurement without removing caliper. Patented.
Avail:
0 in Stock
Warehouse: US-17

GearWrench 2324 Brake Lining Gauge

KD Tools
Gauge measures bonded brake lining from 0 to 1/2_ in 1/64_ graduations. Place gauge over brake shoe to take reading.
Avail:
0 in Stock
Warehouse: US-17

GearWrench 2324D Wide Band Brake Lining Gauge

KD Tools
Measures bonded brake lining from 0 to 1/2" in 1/64" graduations Place gauge over brake shoe to take reading For use with larger hard to remove oil filters For use with a 1/2 inch square drive tools Designed for the high torque requirements of t
Avail:
0 in Stock
Warehouse: US-17

GearWrench 2326 Tire Tread and Brake Lining Gauge

KD Tools
Measure the amount of lining remaining on riveted drum shoes and disc brake pads. Gauge measures tire tread depth up to 9/16_ in graduations of 1/64_.
Avail:
0 in Stock
Warehouse: US-10

GearWrench 2424D 22 Blade SAE/Metric Go-No-Go Feeler Gauge

22 Blade SAE/Metric Go-No-Go Feeler Gauge 22 blades cover the complete range of sizes from .004" to .027" and .10mm to .69mm Blades have both SAE and metric measurements Gauge checks clearance measurements with a 0.002" range Stepped blades quickly i
Avail:
0 in Stock
Warehouse: US-17

GearWrench 3377 Brake Resetting Gauge

KD Tools
Used to set the proper clearance between brake lining and drum prior to assembly Inside calipers measure drum diameters and outside calipers transfer measurement to brake shoes Knurled knob locks tool at measurement Diameter range: 6-1/2 to 14-1/4
Avail:
0 in Stock
Warehouse: US-10

GearWrench 3730 Outside Mic 0-1"

KD Tools
Industrial quality carbide tip, swiss style with ratchet stop and lock lever. 0-1 range with .0001 graduations. Enameled finish. Fitted in a box with instructions and zero adjusting key.
Avail:
0 in Stock
Warehouse: US-1

GearWrench 3774 Rotor Slide Caliper

KD Tools
Measures break Rotors and ball joints. 6 150MM length, 3-1/2 throat depth. Range: .0005 / .01mm.
Avail:
0 in Stock
Warehouse: US-1

GearWrench 3774D 6" Digital SAE/Metric Brake Rotor Gauge

0" to 6" Manual power on/off SAE/metric system interchange at any position Zero setting at any position Data output interface Measure wear dimension of the brake rotors Resolution/repeatability 0.0005" x 0.01mm Includes plastic case for storag
Avail:
0 in Stock
Warehouse: US-2
Result Pages: