Displaying 1 to 17 (of 17 products)
Rotates Piston Back Into the Caliper When Replacing Pads. A new side has been added and one side has been modified. This tool now fits more applications. Used on vehicles with four wheel disc brakes. Fits most domestic and some import applications. P…
Brand: | Lisle |
Part #: |
28600 |
UPC: |
083045286004 |
Weight: |
0.3 lbs |
Condition: | New |
Set Contains: OTC-7553 - Four wheel disc brake adapter tool Fits 1-1/2 pistons. Usable two ways: one side fits GM Honda Mitsubishi Mazda Dodge Conquest and Subaru; other side fits Ford Pontiac Fiero Subaru and Toyota. OTC-7554 - Four wheel disc br…
Brand: | OTC |
Part #: |
7317A |
UPC: |
0731413037108 |
Weight: |
10 lbs |
Condition: | New |
Designed to rotate the parking-brake-activated piston back into the caliper cylinder when replacing worn pads on vehicles equipped with 4-wheel disc brakes Tool will function on most domestic and import vehicles
Brand: | KD Tools |
Part #: |
3163 |
UPC: |
082171031632 |
Weight: |
0.2 lbs |
Condition: | New |
Left turn and right turn threads 2 blocks with either adjustable 2 in or 3 pin configuration Works on huge amount of applications Takes the place of larger sets
Brand: | Cal-Van Tools |
Part #: |
723 |
UPC: |
047084007235 |
Weight: |
0.4 lbs |
Condition: | New |
Cleans brake caliper mounting surfaces Removes brake dust, rust and other debris from brake caliper castings Brush is made with heavy-duty steel wire and is angled to fit into tight places Brush comes with molded handle grip for easy use
Brand: | Lisle |
Part #: |
13410 |
UPC: |
083045134107 |
Weight: |
0.2 lbs |
Condition: | New |
This is the approved method of servicing seized four wheel disc brake rear caliper slides on GM W-body cars: the bushing driver (No. 49012) attaches to your air hammer to remove the frozen slide; the hone (No. 219387) cleans out the inside of the cal…
Brand: | OTC |
Part #: |
7639 |
UPC: |
0731413004322 |
Weight: |
1.25 lbs |
Condition: | New |
For Converting 3-Legged 265 or 2544 Cylinder Hone to Disc Brake Hone
Brand: | KD Tools |
Part #: |
2004 |
UPC: |
082171020049 |
Weight: |
0.05 lbs |
Condition: | New |
Caliper checks inside and outside measurements in 1/32 and 1mmincrements. Graduations are permanently etched on the surface.
Brand: | KD Tools |
Part #: |
2527 |
UPC: |
082171025273 |
Weight: |
0.15 lbs |
Condition: | New |
Features: Stainless steel fully hardened frame, satin chrome finish Reading Single revolution dial graduated .001 Four measurements, inside, outside, depth & step Covered rack - thumb roll - lock screw Measuring faces hardened, ground and lapped …
Brand: | KD Tools |
Part #: |
3750 |
UPC: |
082171037504 |
Weight: |
0.8 lbs |
Condition: | New |
Carbon fiber dial caliper easy to read. Direct inch/metric conversion and 0.001/0.1mm graduations. 0-6/0-150mm range.
Brand: | KD Tools |
Part #: |
3752 |
UPC: |
082171037528 |
Weight: |
0.16 lbs |
Condition: | New |
Manual power on/off With data output interface .01", .1mm
Brand: | KD Tools |
Part #: |
3757 |
UPC: |
082171037573 |
Weight: |
0.2 lbs |
Condition: | New |
Provides both left-handed and right-handed thrust bolt assemblies Complete set of adaptors for a wide range of vehicle applications Designed for push back and wind back brake pistons Left-handed thrust bolt required for Ford, Citroen, and Renault …
Brand: | Astro Pneumatic |
Part #: |
78619 |
UPC: |
0745227017744 |
Weight: |
9.8 lbs |
Condition: | New |
Frees up frozen bleeder valves for easy removal A must for brake work and brake fluid flushing Keeps shop from turning flushing jobs away due to frozen bleed screws Uses air hammer to get the job done Saves time and expense of replacing calipers…
Brand: | Vacula |
Part #: |
12-080-1000 |
UPC: |
963041053988 |
Weight: |
0.75 lbs |
Condition: | New |
Designed to rotate the parking brake activated piston back into the caliper cylinder when replacing worn pads on vehicles equipped with four wheel disc brakes.
Brand: | ATD Tools |
Part #: |
5060 |
UPC: |
0663126050603 |
Weight: |
0.2 lbs |
Condition: | New |
Compresses any size brake caliper, from motorcycles, standard size cars, trucks and SUVs, and even 18 wheelers. A 3/8 ratchet can be inserted on the end of the Tool for much easier use Can also perform front brake jobs by flipping the head around …
Brand: | Cal-Van Tools |
Part #: |
727 |
UPC: |
047084007273 |
Weight: |
1.55 lbs |
Condition: | New |
Handles a variety of light-duty Ford models. For use on: 1989 to 1996 Aerostar, Bronco, Ranger, E- and F-series pickups 1989 to 91 Bronco II; and 1991 to 1995 Explorer.
Brand: | OTC |
Part #: |
7499 |
UPC: |
0731413004995 |
Weight: |
10 lbs |
Condition: | New |
These hangers are designed to hold brake calipers out of your way during brake, bearing, suspension, or axle work In doing so, they make the jobs easier and faster, and reduce possible brake hose damage
Brand: | OTC |
Part #: |
7661 |
UPC: |
0731413005046 |
Weight: |
10 lbs |
Condition: | New |
Displaying 1 to 17 (of 17 products)