Side Terminal Tools
Displaying 1 to 21 (of 21 products)
Lisle 14900 Terminal Tool for GM
Eliminate Damaged Wires and Terminals. Lisle Wire Terminal Tools are designed to remove wires from terminals without damage to either. 14900 is designed for Pack-Con and Weather-Pack terminals on GM C3 Systems. Tool can also retrieve trouble codes fr…
Lisle 54150 Battery Terminal and Wiper Arm Puller
Removes battery terminals and bolted on wiper arms A dual-purpose puller Easily removes stuck battery terminals Tighten knurled cone to force jaws under the cable clamp Turn center screw to lift clamp off terminal Also removes bolted on windshie…
Lisle 11400 Side Terminal Battery Cleaner
Coil Spring cutters polish the battery contact while stainless steel brushes clean the cable terminals
Lisle 57750 Wire Terminal Tool Kit
Terminal tools work on conventional terminals as well as Pack-Con and Weather-Pack terminals found on many GM vehicles. New blue terminal tool fits many Ford applications. The handle slips over the probes to protect the technician's hand as well as t…
Lisle 57780 Terminal Tool For Ford
Quickly and easily releases wires without damage to the wires or terminal blocks. The single blades have a bevel ground onto the end for working on small wire terminals found on newer vehicles.
OTC Tools & Equipment 4615 5/16" Long Side-Terminal Battery Wrench
Designed for use on GM side-terminal batteries or any 5/16" hex head battery bolt Long handle allows access to hard-to-reach battery terminal bolts 6 Point Box end 10" long Insulated handle
GearWrench 3367 Side Terminal Battery Wrench
Use wrench for most GM side terminal batteries or any 5/16_ battery terminal bolts. It has an insulated handle to reduce risk of electrical shock and reversible 5/16_ ratcheting box wrench. Tool is nickel plated for durability and corrosion resistanc…
Associated Auto Equipment 6200 SIDE TERM ADAPTER PR
Fits Associated, and most other insulated clamps Allows for easier connections in hard to reach spots
E-Z Red S520 side lifter
Lift and carry batteries safely. Padded rubber grips are riveted and glued. Non-slip vinyl hand grip.
Cal-Van Tools 550 400 Peak Amps Allstart Boost Portable Power Source with Jump Start Function
300 cold cranking amps 12,000 mAh high capacity fast charging battery with low self-discharge For use on V8 5.4 and smaller gas engines Improved intelligent clamps Features 12V emergency start, USB port and LED flashlight with (3) lighting modes…
Kastar Hand Tools 6525 Extra Long 5/16 Ratcheting Side Terminal Battery Wrench
This extra length (9-3/4?) allows for better accessibility in reaching side terminals on the following: Pontiac Grand AM 94 to present, GM W Body Cars 94 to present, Buick Regal, Olds Cutlass, Chevrolet Lumina, and Pontiac Grand Prix. Features a reve…
OTC Tools & Equipment 4611 Battery Terminal Puller
Designed to remove the battery cable clamp from the post without causing damage to the battery. Spring-loaded sharp jaws get under the clamp for a secure grip.
OTC Tools & Equipment 4613 Battery Pliers
Serrated jaws firmly grip the battery terminal nut or bolt. Offset handles allow access in hard-to-reach areas. Works on both top-post and side-post battery terminals.
OTC Tools & Equipment 4617 Side Terminal Battery Brush
Designed to clean corrosion from side post batteries. One brush used to clean battery terminals; other brush used to clean battery cable ends. Plastic handle resists battery acid.
GearWrench 202D Battery Terminal Puller
Use puller to remove the battery terminal clamp without damaging the battery post Works on corroded spring-type clamps Loosen the clamp bolt, place jaws under each side of the battery cable clamp and tighten the center screw until the clamp is free
GearWrench 2173DD Three-Way Battery Tool
Sharp steel blades remove corrosion and put a correct angle on terminal clamps and posts Use the 6-Blade, tapered reamer to quickly clean terminal clamps Post cleaners are marked positive and negative, and are sized to accurately fit terminal posts…
E-Z Red BK530 The Gripper Battery Lifter
Multiple ply rubber strap handle. Fits virtually all car batteries. Works with group 65 batteries.
Cal-Van Tools 569 Camo Jump Starter
450 cranking amps and 900 peak amps 12V vehicle jump-start, back up charger for all brands of devices Includes new Smart Clamp for jumpstarting with improved built-in safety and diagnostic features Water resistant design IP65 rated. Up to 1500 c…
Cal-Van Tools 598AS Folding Wireless Charger
Simple use for wireless charging enabled phones With two charging coils, charge in either orientation Powerful enough to charge through many protective cases Unit will charge phones in folded and unfolded positions Folds for convenient storage, m…
Cal-Van Tools 59900AS Flex Mount Wireless Charger
Simple and Easy to Use. Press the open button to release the quick-adjust arms. Place the device on the charging base and press the arms back in, securing your device. Versatile 3-in-1 Mounting. All flex mount accessories are included to convenient…
Displaying 1 to 21 (of 21 products)