Description:
Get the ACDelco 18A1195AC Disc Brake Rotor and Hub Assembly for your vehicle. Buy now and secure your purchase online!
ACDelco Advantage Coated Disc Brake Rotor and Hub Assemblies provide reliable vehicle braking power. With this assembly the rotor is conveniently pre-fitted to the wheel hub as one combined piece. Their robotic-applied, baked-on coating helps prevent brake pulsation, helps prevent the rotor from seizing to the hub, and provides superior rust prevention against harsh environmental elements such as rain, snow, and corrosive road sprays. They feature a non-directional ground finish that helps to extend brake pad life and minimizes thickness variation. They are also ready to be installed right out of the box, with no machining required. These dependable aftermarket Advantage Coated Disc Brake Rotor and Hub Assemblies offer quality at an economical price. ⚠ WARNING: Cancer and Reproductive Harm - https://www.P65Warnings.ca.gov
Features and Benefits:
- Manufactured with multiple alloys for improved heat dissipation and performance
- Mill-balanced for proper rotor function; no extra weights needed
- Quality validated for proper metallurgy and correct brake plate thickness
- Rounded radius for added strength
Specifications:
ABS Tone Ring Included:
Yes
Directional or Non-Directional Brake Surface:
Non-Directional
Discard Thickness:
0.97 in.
Discard Thickness:
24.65 mm
Mounting Bolt Hole Circle Diameter:
134.85 mm
Mounting Bolt Hole Circle Diameter:
5.31 in.
Mounting Bolt Hole Diameter:
0.6 in.
Mounting Bolt Hole Diameter:
15.25 mm
Mounting Bolt Hole Quantity:
5
Nominal Thickness:
1.03 in.
Nominal Thickness:
26.15 mm
Overall Height:
104.15 mm
Rust Resistant Coating:
Yes
Solid Or Vented Type Rotor:
Vented
Stud/Lug Hole Quantity:
5
Features and Benefits:
- – Calipers and wheel cylinders should be checked every brake inspection and serviced or replaced as required.
- – Check brake fluid level at every oil change. Replace fluid according to owner's manual recommendations.
- – Check the thickness of your brake pads.
- – Inspect the brake lines for rust, punctures or visible leaks (You may be able to do this, but consult a qualified technician if necessary).
- – Inspection of brake lining and pads for wear or contamination by brake fluid or grease.
- – Inspection of the brake hoses for brittleness or cracking.
- – Inspection of wheel bearings and grease seals.
- – Parking brake adjustments (as needed).
- The following inspections and maintenance procedures can help prevent potential brake problems:
- The following should be conducted by a qualified technician:
Specifications:
Manufacturer Warranty:
12 Months
